Only started yesterday before that it ran really well, when i went to start my NH swb paj the plugs wouldnt pre glow (wont click), checked all the fuses and they seem good. It will eventually start and run.
Im a little lost this is my first diesel so still working it out. My thoughts are that it is the relays but i dont know which ones it will be.
Anyone have a wiring diagram for the glow circuit?
Or any other ideas?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
diesel NH paj, plugs wont pre glow???
Moderator: -Scott-
Re: diesel NH paj, plugs wont pre glow???
Hey mate I don't no were there are or which ones they are but when it
happened to my hilux and it still is i can't find the problem and can't find it all I did
was take the wire off the glow rail and put one that reachs the battry
and hold it on for 10secs that way when the car is cold it starts first go
I m going to fix it but all in due time
happened to my hilux and it still is i can't find the problem and can't find it all I did
was take the wire off the glow rail and put one that reachs the battry
and hold it on for 10secs that way when the car is cold it starts first go
I m going to fix it but all in due time
if lifes a bitch.............deaths a sl*t cause death cums 4 all of us
Who is online
Users browsing this forum: No registered users and 0 guests