Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Engineering certificate

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 15
Joined: Fri Dec 24, 2004 6:53 pm
Location: Hornsby district

Engineering certificate

Post by iangq »

I need a couple of small items on my GQ engineered. Larger items done by TIC at BBM open day ages ago. Can't get hold of them now. Any one have a recommendation in Sydney, north side would be nice ! Have had a seat change, a 1 inch body lift to incorporate a suspension brace, & this on top of already crtificated 4" susp. 35's etc.
Thanks in advance . Ian.
Imagine if there were no hypothetical situations!
Top
User avatar
DamTriton
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Re: Engineering certificate

Post by DamTriton »

RTA should have a list of engineers in your area.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Top
Posts: 248
Joined: Tue Mar 30, 2004 3:44 pm
Location: Sydney Australia

Re: Engineering certificate

Post by zuffen »

Werner from TIC had his license pulled a couple of years ago.

Check the RTA Website for an engineer.

People are reluctant to mention engineers who are rational on the Net.
Cheers,

Zuffen

There's no such a thing as too much horsepower
Top
Posts: 15
Joined: Fri Dec 24, 2004 6:53 pm
Location: Hornsby district

Re: Engineering certificate

Post by iangq »

Thanks gents, Found the RTA list & 1 close by so will start there
Regards Ian.
Imagine if there were no hypothetical situations!
Top
Posts: 15
Joined: Fri Dec 24, 2004 6:53 pm
Location: Hornsby district

Re: Engineering certificate

Post by iangq »

G'day again, Checked the RTA list & found it most unhelpful. Very few listed,only one in Sydney that did light vehicles & qualified for body & chassis ! He dealt only in truck type gear. So no help from RTA. That guy however gave me the No. of someone that could help. Also was given a couple of names by word of mouth. All now in hand , but interesting that RTA list must be way out of date or sometning.
Thanks for the interest. Ian
Imagine if there were no hypothetical situations!
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Re: Engineering certificate

Post by ISUZUROVER »

iangq wrote:G'day again, Checked the RTA list & found it most unhelpful. Very few listed,only one in Sydney that did light vehicles & qualified for body & chassis ! He dealt only in truck type gear. So no help from RTA. That guy however gave me the No. of someone that could help. Also was given a couple of names by word of mouth. All now in hand , but interesting that RTA list must be way out of date or sometning.
Thanks for the interest. Ian

Is Athol (who used to post here) still around?
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 147
Joined: Tue Apr 26, 2005 5:52 pm
Location: Newy

Re: Engineering certificate

Post by toy77 »

Don't know if he is still posting here,

But he is still engineering - i spoke to him yesterday.
Has engineered my street car a number of times - and will do my 4x4 shortly.
I have had no issues with any of the requirements he has asked for, and he has always been able to offer solutions to ensure the car complies.

Cheers
Stew
Top
Posts: 15
Joined: Fri Dec 24, 2004 6:53 pm
Location: Hornsby district

Re: Engineering certificate

Post by iangq »

Hi Stew, Thanks for the advice that Athol is still doing certificates.
I sent you a PM with my phone no. If you could pass this on to Athol he can ring me if he is interested Regards Ian.
Imagine if there were no hypothetical situations!
Top
Posts: 147
Joined: Tue Apr 26, 2005 5:52 pm
Location: Newy

Re: Engineering certificate

Post by toy77 »

Hey mate,

I sent you back a pm wih his contact details a few days ago... just give him a bell.
Let me know if the pm didnt turn up...

Cheers
Stew
Top
Posts: 654
Joined: Thu Nov 28, 2002 10:04 am
Location: Central Coast

Re: Engineering certificate

Post by Bentzook »

I had this old frucker engineer my 235x85x16 tyres on 15x8JJ rims. So who knows better than them ehh :rofl:
"Gravitron " : drives the first layer of Gravity
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests