Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
What to do what to do....
What to do what to do....
Ok so I am soo up in the air over what engine/trans set up to put into my sierra. I need it to handle angles and to have fairly good down low torque. It will not be a daily driver and more then likely it will be a trailer queen comp/play rig in a few months.
Some of you will have seen my build up so far but hose who have not. I have a chopped down swb W/T Sierra I am running 60 sieries diffs, Hilux springs all around on 33s (37s for comps) 98" wheel base, exo, winch, blahh blahh blahh you get the idea.
Here are my options I have and the costs.
G16A vitara on gas with 5speed vitara box twin transfers $900 all up with the gas convert running.
G16B vitara (with only 90ks on it) with vitara 5 speed box twin transfers $1800 all up in and running
CA18 with CA20 auto gearbox $900 with a hell of a lot of fab work to get it in and sitting low.
V6 Bombador with Auto $900 (with bigger radiator and all the other little things needed)even more fab work and it will NEVER get past a engineer if in the future even if want it to.
Every day I flop back and forth between them. But it has come time to make the plans and stick to it
I really want to keep it Suzuki but I didn't want it to spend big bucks. But I want it to be EFI not Gas.
The CA18 is better down low and it has a auto box and that is better then any twin transfer.
If I am going to go through the effort to put a CA18 in why not just do the Bomador V6 and have a VERY VERY cheap to fix engine down the track.
I have the money to do any of them but yahh just cant decide. What do you all think???
Some of you will have seen my build up so far but hose who have not. I have a chopped down swb W/T Sierra I am running 60 sieries diffs, Hilux springs all around on 33s (37s for comps) 98" wheel base, exo, winch, blahh blahh blahh you get the idea.
Here are my options I have and the costs.
G16A vitara on gas with 5speed vitara box twin transfers $900 all up with the gas convert running.
G16B vitara (with only 90ks on it) with vitara 5 speed box twin transfers $1800 all up in and running
CA18 with CA20 auto gearbox $900 with a hell of a lot of fab work to get it in and sitting low.
V6 Bombador with Auto $900 (with bigger radiator and all the other little things needed)even more fab work and it will NEVER get past a engineer if in the future even if want it to.
Every day I flop back and forth between them. But it has come time to make the plans and stick to it
I really want to keep it Suzuki but I didn't want it to spend big bucks. But I want it to be EFI not Gas.
The CA18 is better down low and it has a auto box and that is better then any twin transfer.
If I am going to go through the effort to put a CA18 in why not just do the Bomador V6 and have a VERY VERY cheap to fix engine down the track.
I have the money to do any of them but yahh just cant decide. What do you all think???
Re: What to do what to do....
g16 with auto and single case
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Re: What to do what to do....
G16B with the auto would be the go if you have the cash to do so.
The carby engine with 37's might need some more mojo, even with gears.
The carby engine with 37's might need some more mojo, even with gears.
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Re: What to do what to do....
Speaking from experience I wouldn't go with the commodore motor as it's too heavy but does have grunt to spare . Definatly I'd be looking long and hard at the g16b with the auto, it would have enough power for the 37s and with the auto it would be alot nicer to the rest of the drivetrain
Van-tastic!
Posts: 6107
Joined: Tue Apr 10, 2007 5:22 pm
Joined: Tue Apr 10, 2007 5:22 pm
Location: .."I MIGHT NOT AGREE WITH WHAT YOU SAY, BUT ILL DEFEND YOUR RIGHT TO SAY IT".
Re: What to do what to do....
327 Chev, with a two spd auto
slugs are just snails that sold their belongings for drug money
Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
Re: What to do what to do....
why not a 4agze with a hybrid vit 4 speed /volvo auto with a home made kicker 3 with twin stock vit and sierra t case that is what is going in to mine best of every world
Re: What to do what to do....
Yes I know they are heavy but your forgetting mine is not a stocko sierra. Hilus springs and 60 sieries diffs it will hold the weight.troopy94 wrote:Speaking from experience I wouldn't go with the commodore motor as it's too heavy but does have grunt to spare . Definatly I'd be looking long and hard at the g16b with the auto, it would have enough power for the 37s and with the auto it would be alot nicer to the rest of the drivetrain
I like the hybrid idea.
I can get a 4 speed auto for a vitara for $600. I may just pay for it and be happy.
Re: What to do what to do....
forgot to say 4 speed auto hybred needs no computer to run less stuff to go wrong
Re: What to do what to do....
Yes I have been watching your build and my zook that has the v6 in is very far from stock. It is also running 60 series diffs with rear steer and dirty 30s. To give you an idea of the weight of the v6 my zook runs standard 80 series coils in the front which compress down to only 300mm when at ride height and don't price a rear drop sump from marks 4x4adapters the price is scary.V.W.Dave wrote:Yes I know they are heavy but your forgetting mine is not a stocko sierra. Hilus springs and 60 sieries diffs it will hold the weight.troopy94 wrote:Speaking from experience I wouldn't go with the commodore motor as it's too heavy but does have grunt to spare . Definatly I'd be looking long and hard at the g16b with the auto, it would have enough power for the 37s and with the auto it would be alot nicer to the rest of the drivetrain
I like the hybrid idea.
I can get a 4 speed auto for a vitara for $600. I may just pay for it and be happy.
Re: What to do what to do....
put a v6 vitara in it
current truck, 105 series GXL diesel 6" springs & twin pro lockers
sierra LWB spoa one wide track diffs twin locked
Sierra Parts Wanted pm me
sierra LWB spoa one wide track diffs twin locked
Sierra Parts Wanted pm me
Re: What to do what to do....
Otis (The wifes Zook) has a V6 commy motor and TH700 in it and its just great, and the best part is you can get parts for it at coles nearly .......
Harb
http://www.4wdmonthly.com.au/shed/index.php?id=2244&im=1
http://www.4wdmonthly.com.au/shed/index.php?id=2244&im=1
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)
Contact:
Re: What to do what to do....
G16B auto single geared case
Or 4A-GZE - auto - geared case
Layto....
Or 4A-GZE - auto - geared case
Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Re: What to do what to do....
X2....But I'm biased.lay80n wrote: Or 4A-GZE - auto - geared case
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Re: What to do what to do....
Harb wrote:Otis (The wifes Zook) has a V6 commy motor and TH700 in it and its just great, and the best part is you can get parts for it at coles nearly .......
not that hunk of blue junk is it?
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Re: What to do what to do....
Are you sure you want to start calling a certain blue car junk?joeblow wrote:Harb wrote:Otis (The wifes Zook) has a V6 commy motor and TH700 in it and its just great, and the best part is you can get parts for it at coles nearly .......
not that hunk of blue junk is it?
[quote="Harb"]Well I'm guessing that they didn't think everyone would carry on like a big bunch of sooky girls over it like they have........[/quote]
Re: What to do what to do....
1.9 or 2.0 turbo diesel =)
http://en.wikipedia.org/wiki/JTD_engine" onclick="window.open(this.href);return false;
http://en.wikipedia.org/wiki/JTD_engine" onclick="window.open(this.href);return false;
The worst thing about censorship is ███████.
Re: What to do what to do....
I would love to have a small black smoke blower but I cant find one that would be light enough or cheap enough.
I did come across a ford diesel (2.2 or something) not sure exactly with a gearbox for $800 but the guy was very shady and he couldn't tell me anything about either of them.
Has anyone ever put a 2.0 vitara engine in a sierra? Do they use the same trans bell housing as the 1.6? I have never even looked at a 2.0.
I did come across a ford diesel (2.2 or something) not sure exactly with a gearbox for $800 but the guy was very shady and he couldn't tell me anything about either of them.
Has anyone ever put a 2.0 vitara engine in a sierra? Do they use the same trans bell housing as the 1.6? I have never even looked at a 2.0.
Re: What to do what to do....
Have a look here Did a bit of reasearch. J18 or 20 etc Bolt pattern look the same as G16
http://www.auszookers.com/index.php?nam ... ic&t=15473" onclick="window.open(this.href);return false;
I know you cant reply..
But sierra gearbox's arnt meant to last long.. But would be better if you used vit stuff.
I think im now sticking with what i know..G16 Baleno.
http://www.auszookers.com/index.php?nam ... ic&t=15473" onclick="window.open(this.href);return false;
I know you cant reply..
But sierra gearbox's arnt meant to last long.. But would be better if you used vit stuff.
I think im now sticking with what i know..G16 Baleno.
I am Tim
Re: What to do what to do....
I am thinking I am just going to keep it simple and get the Vitara g16b. I also know where there is a Balino dizy engine I can get for $250 but then I would need a vitara cam, angle drive and would need to track down a wire harness and computer.
I can make just about anything work but I already have the vitara gearbox mount made up.
I can make just about anything work but I already have the vitara gearbox mount made up.
Re: What to do what to do....
Has anyone ever put a R2 with auto or 5speed (ford/mazda) into a sierra?
Re: What to do what to do....
Diesel out of a mid 90s ford vans/mazda b2200s From memmory they are 2.2l deisel.
Re: What to do what to do....
yes.....
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Re: What to do what to do....
??? and ???? What did you put it in how did it go?joeblow wrote:yes.....
If anyone has put a Comy V6, Turbo 700 and hilux transfer into a zook???
Re: What to do what to do....
In my opinion here the best one ive seen.V.W.Dave wrote:If anyone has put a Comy V6, Turbo 700 and hilux transfer into a zook???
http://forum.mudrhino.com.au/viewtopic. ... d05dea49b4" onclick="window.open(this.href);return false;
Re: What to do what to do....
Yahh I read over that a few days ago. nice rig. He dosnt really show much of how it all fit.Mitchie wrote:In my opinion here the best one ive seen.V.W.Dave wrote:If anyone has put a Comy V6, Turbo 700 and hilux transfer into a zook???
http://forum.mudrhino.com.au/viewtopic. ... d05dea49b4" onclick="window.open(this.href);return false;
Re: What to do what to do....
I looked up on the J18,20 and 23A to sierra 5 speed ages ago. Just needs a spline shortening I think and bolts straight up. Bollocks to the boxes not lasting, I've seen them behind turbo GTi motors and going the distance with way more power. The sierra auto even is a trimatic, they can be built to take bulk HP and I've driven them to 11 second passes behind V8's. J series would be awesome IMO.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Re: What to do what to do....
There's a pretty strong market for good sierra Gearboxes GRPABT1 that tells me you're not 100% correct. In fact, I have a couple of junk sierra gearboxes in my shed that also indicate you're not 100% correct.
Whilst they seem fairly strong from a gear strength point of view, bearings and synchros seem to not last all that long - and the newest sierra geabox is, what, 13 years old now?
If I was swapping a driveline and wanted a manual, I'd use a vitara manual behind whatever suzuki engine I chose. Whilst they aren't much stronger gear-wise, they do have a larger clutch and are considerably newer. Also, forking over money for an adapter plate to allow you to use a smaller clutch and flywheel than the one suzuki designed to use with that engine seems a bit silly.
Steve.
Whilst they seem fairly strong from a gear strength point of view, bearings and synchros seem to not last all that long - and the newest sierra geabox is, what, 13 years old now?
If I was swapping a driveline and wanted a manual, I'd use a vitara manual behind whatever suzuki engine I chose. Whilst they aren't much stronger gear-wise, they do have a larger clutch and are considerably newer. Also, forking over money for an adapter plate to allow you to use a smaller clutch and flywheel than the one suzuki designed to use with that engine seems a bit silly.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Re: What to do what to do....
I only had the sierra 5speed behind a 1.6 carby and flogged out 2 boxs in 9 months so I am with steve on this one. Going into second gear on most of my freinds zooks crunch as well.
Who is online
Users browsing this forum: No registered users and 69 guests