Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Tiger11 Z winch install
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Tiger11 Z winch install
I am fitting a Tiger11 Z 9000lb winch in a standard ARB non winch bar and i have a few questions if any one can help it would be greatly appreciated.
can you rotate the end easy so the handle to engage/disengage etc is in a different position to how it comes? ie i want to put a hole in the bar and have the handle come up through it instead of have to reach in and under car to operate it.
Also it came with rope and a plate type fair lead where i have untill now always had cable and rollers. At what height do i fit the fair lead plate?? Hope that makes sence.
Thanks if you can help cheers Daz
can you rotate the end easy so the handle to engage/disengage etc is in a different position to how it comes? ie i want to put a hole in the bar and have the handle come up through it instead of have to reach in and under car to operate it.
Also it came with rope and a plate type fair lead where i have untill now always had cable and rollers. At what height do i fit the fair lead plate?? Hope that makes sence.
Thanks if you can help cheers Daz
If you can not get there in a 4wd its not worth looking at
Re: Tiger11 Z winch install
gday daz
i think this will be the best answer to easy
http://www.youtube.com/watch?v=Nt-VpTs4 ... embedded#!
i think this will be the best answer to easy
http://www.youtube.com/watch?v=Nt-VpTs4 ... embedded#!
71 fj40 front shackle reversal +3" , 55 rear springs +3", 35 15.5 claws , 60 diff's 4wheel disc's , SOON TO BE WINDSOR V8 + 5 speed
74 fj40 stock but very clean
84 bj40 3b stock and unloved
74 fj40 stock but very clean
84 bj40 3b stock and unloved
Re: Tiger11 Z winch install
The hawse fairlead bolts up to the bottom bolts of the winch. The housing can be spun around to place the handle almost anywhere.
Re: Tiger11 Z winch install
Thanks for the feed back guys its mounted up in bar now just need to wire it up.
Cheers Daz
Cheers Daz
If you can not get there in a 4wd its not worth looking at
Re: Tiger11 Z winch install
need more pics now....
Re: Tiger11 Z winch install
Ill put the bar back on Monday night ill post some pics thentoy77 wrote:need more pics now....
cheers Daz
If you can not get there in a 4wd its not worth looking at
Re: Tiger11 Z winch install
How did you reinforce the bar?
2008 Patrol wagon and 99 Patrol TD Ute
Cairns
Cairns
Re: Tiger11 Z winch install
toaddog wrote:How did you reinforce the bar?
The style of bar Daz has is exactly the same as the winch bar. It just doesn't have the cut outs so there is no need to reinforce the bar.
Re: Tiger11 Z winch install
Winch is mounted in bar i have strengthened the bar a little because my brother had the same bar and did the same mod but with a 9000lb warn and over time the bottom of the bar bent out wards.
Have moved all i need to make room under bonnet to fit the control box after the control box is mounted winch will be ready to use.
sorry about pic quality they are late night shed pics
cheers Daz
Have moved all i need to make room under bonnet to fit the control box after the control box is mounted winch will be ready to use.
sorry about pic quality they are late night shed pics
cheers Daz
If you can not get there in a 4wd its not worth looking at
Re: Tiger11 Z winch install
One more question
A slow drawn out job i know aparantly i prommised to do some work around the house
I have finished mounting the controler on the inner guard close to battery. Although i have not used the winch under load it certainly seems to be fine in the shed the 2 speed bit is very cool, pitty you can not change it from hi to low in the cab.
The one thig im not sold on is the remote control the winch dose not seem to stop as quick as when use via wire control.
My question; I wish to wire a in cab controler i have run 3 wires from the control box to a rocker switch in the cab. There is 3 wires (3 pin controler) that go to the back of the hand controler plug. I think red, yellow and brown from memory. Do i just test which wire is powered all the time and run it to the central connection on the rocker switch? is it that easy?
Thanks for your help Darren
A slow drawn out job i know aparantly i prommised to do some work around the house
I have finished mounting the controler on the inner guard close to battery. Although i have not used the winch under load it certainly seems to be fine in the shed the 2 speed bit is very cool, pitty you can not change it from hi to low in the cab.
The one thig im not sold on is the remote control the winch dose not seem to stop as quick as when use via wire control.
My question; I wish to wire a in cab controler i have run 3 wires from the control box to a rocker switch in the cab. There is 3 wires (3 pin controler) that go to the back of the hand controler plug. I think red, yellow and brown from memory. Do i just test which wire is powered all the time and run it to the central connection on the rocker switch? is it that easy?
Thanks for your help Darren
If you can not get there in a 4wd its not worth looking at
Re: Tiger11 Z winch install
Red wire is battery power, yellow (terminal 'A' on solenoid)is in & brown/white (Terminal 'C') is out. Are you able to post a photo of the solenoid wiring? Mine was spinning opposite to what it should so I've swapped the stator field wires around. Just want to ensure it was these wires around the wrong way and not the small control wires. There are two different wiring diagrams on the Tigerz website which show opposite things.
Re: Tiger11 Z winch install
DAZ wrote:One more question
Although i have not used the winch under load it certainly seems to be fine in the shed the 2 speed bit is very cool, pitty you can not change it from hi to low in the cab.
The one thig im not sold on is the remote control the winch dose not seem to stop as quick as when use via wire control.
Thanks for your help Darren
From their website the new 2011 winches have remotoe free spool. My remote setup also behaved the same and from what I spoke with Paul at Tigerz11 about, they are all like that unless spending big big $$$
NEW 2011 WINCHES COMING
12000LB Two Speed Winch and Big Base
9000LB Two Speed Winch and Big Base
10000LB Fast Winch and Big Base
10000LB Fast Winch with Auto Clutch
10000LB Fast Winch with Auto Clutch and Big Base
10000LB Twin Motor
10000LB Twin Motor and Big Base
10000LB Twin Motor with Auto Clutch
10000LB Twin Motor with Auto Clutch and Big Base
BELOW IS THE 10000LB TWIN MOTOR WITH AUTOMATIC CLUTCH WITH A BIG BASE TO HOLD 40M DYNEEMA ROPE
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Re: Tiger11 Z winch install
Hi Daz
You did view the video how to rotate that gearbox i hope ??
You have tested in both gears ??
Paul
You did view the video how to rotate that gearbox i hope ??
You have tested in both gears ??
Paul
DAZ wrote:Winch is mounted in bar i have strengthened the bar a little because my brother had the same bar and did the same mod but with a 9000lb warn and over time the bottom of the bar bent out wards.
Have moved all i need to make room under bonnet to fit the control box after the control box is mounted winch will be ready to use.
sorry about pic quality they are late night shed pics
cheers Daz
Tigerz11 10000lb Quickest & Most Powerful Electric Low Mount Recovery Winch on the planet today.
Dealers : http://www.tigerz11.com.au/distributors.html
Dealers : http://www.tigerz11.com.au/distributors.html
Re: Tiger11 Z winch install
Yes the vid was the perfect helper. I did not have sound so im not sure what he was saying about the seal. I have checked it in both gears yes, why you ask?tigerz11 wrote:Hi Daz
You did view the video how to rotate that gearbox i hope ??
You have tested in both gears ??
Paul
DAZ wrote:Winch is mounted in bar i have strengthened the bar a little because my brother had the same bar and did the same mod but with a 9000lb warn and over time the bottom of the bar bent out wards.
Have moved all i need to make room under bonnet to fit the control box after the control box is mounted winch will be ready to use.
sorry about pic quality they are late night shed pics
cheers Daz
cheers Daz
If you can not get there in a 4wd its not worth looking at
Re: Tiger11 Z winch install
if you turn the middle pieces instead of the end plate what will happen is only 1 gear will work
DAZ wrote:Yes the vid was the perfect helper. I did not have sound so im not sure what he was saying about the seal. I have checked it in both gears yes, why you ask?tigerz11 wrote:Hi Daz
You did view the video how to rotate that gearbox i hope ??
You have tested in both gears ??
Paul
DAZ wrote:Winch is mounted in bar i have strengthened the bar a little because my brother had the same bar and did the same mod but with a 9000lb warn and over time the bottom of the bar bent out wards.
Have moved all i need to make room under bonnet to fit the control box after the control box is mounted winch will be ready to use.
sorry about pic quality they are late night shed pics
cheers Daz
cheers Daz
Tigerz11 10000lb Quickest & Most Powerful Electric Low Mount Recovery Winch on the planet today.
Dealers : http://www.tigerz11.com.au/distributors.html
Dealers : http://www.tigerz11.com.au/distributors.html
Re: Tiger11 Z winch install
This feed back is awesome dude thanks im sure im not the only one benifiting from it. My computer dose not have sound what was the reason he was pulling the seal out turning it and showig it? Is it for a drain hole for water ?tigerz11 wrote:if you turn the middle pieces instead of the end plate what will happen is only 1 gear will work
DAZ wrote:Yes the vid was the perfect helper. I did not have sound so im not sure what he was saying about the seal. I have checked it in both gears yes, why you ask?tigerz11 wrote:Hi Daz
You did view the video how to rotate that gearbox i hope ??
You have tested in both gears ??
Paul
DAZ wrote:Winch is mounted in bar i have strengthened the bar a little because my brother had the same bar and did the same mod but with a 9000lb warn and over time the bottom of the bar bent out wards.
Have moved all i need to make room under bonnet to fit the control box after the control box is mounted winch will be ready to use.
sorry about pic quality they are late night shed pics
cheers Daz
cheers Daz
Dose the winch suffer from holding water (the way i have it installed) if submursed etc?
Im very keen to see how it performs under load etc?
Can you winch with the gear in hi if the elec motor is not struggling? If ove loaded in hi is it lily to damage the elec motor or gear box first?
I love the look of the double motored winch above i am wondering if i should put one on Bob and start comping him? How much $$ are they?
Thanks Darren
If you can not get there in a 4wd its not worth looking at
Re: Tiger11 Z winch install
he was showing the seal just so you could see what it looks like and how to put it back in right thats is allDAZ wrote:This feed back is awesome dude thanks im sure im not the only one benifiting from it. My computer dose not have sound what was the reason he was pulling the seal out turning it and showig it? Is it for a drain hole for water ?tigerz11 wrote:if you turn the middle pieces instead of the end plate what will happen is only 1 gear will work
DAZ wrote:Yes the vid was the perfect helper. I did not have sound so im not sure what he was saying about the seal. I have checked it in both gears yes, why you ask?tigerz11 wrote:Hi Daz
You did view the video how to rotate that gearbox i hope ??
You have tested in both gears ??
Paul
DAZ wrote:Winch is mounted in bar i have strengthened the bar a little because my brother had the same bar and did the same mod but with a 9000lb warn and over time the bottom of the bar bent out wards.
Have moved all i need to make room under bonnet to fit the control box after the control box is mounted winch will be ready to use.
sorry about pic quality they are late night shed pics
cheers Daz
cheers Daz
Dose the winch suffer from holding water (the way i have it installed) if submursed etc?
Im very keen to see how it performs under load etc?
Can you winch with the gear in hi if the elec motor is not struggling? If ove loaded in hi is it lily to damage the elec motor or gear box first?
I love the look of the double motored winch above i am wondering if i should put one on Bob and start comping him? How much $$ are they?
Thanks Darren
71 fj40 front shackle reversal +3" , 55 rear springs +3", 35 15.5 claws , 60 diff's 4wheel disc's , SOON TO BE WINDSOR V8 + 5 speed
74 fj40 stock but very clean
84 bj40 3b stock and unloved
74 fj40 stock but very clean
84 bj40 3b stock and unloved
Re: Tiger11 Z winch install
here ya godrr wrote:Red wire is battery power, yellow (terminal 'A' on solenoid)is in & brown/white (Terminal 'C') is out. Are you able to post a photo of the solenoid wiring? Mine was spinning opposite to what it should so I've swapped the stator field wires around. Just want to ensure it was these wires around the wrong way and not the small control wires. There are two different wiring diagrams on the Tigerz website which show opposite things.
If you can not get there in a 4wd its not worth looking at
Re: Tiger11 Z winch install
cool thanks for that. only job to do now is get the controler switch working inside the cabMrGrim wrote:he was showing the seal just so you could see what it looks like and how to put it back in right thats is all
cheers Daz
If you can not get there in a 4wd its not worth looking at
Re: Tiger11 Z winch install
can i go through water with tigerz11 winch??
cheers mick
cheers mick
Re: Tiger11 Z winch install
you are able to go thru rivers ect no problems
if you were using the winch in the water for a recovery i would when you had some spare have a check to see water did not enter.
We endeavour to do the best we can keep water out,there is a twin lip seal either end of the motor.
Silicone in join on the motor
WINCHING IN FAST GEAR
If your load is over 3000lb the winch will cut out ,,it has a overload protective device
Same in low gear 9000lb it will cut out
maintenance is the secret to all winches
Paul
if you were using the winch in the water for a recovery i would when you had some spare have a check to see water did not enter.
We endeavour to do the best we can keep water out,there is a twin lip seal either end of the motor.
Silicone in join on the motor
WINCHING IN FAST GEAR
If your load is over 3000lb the winch will cut out ,,it has a overload protective device
Same in low gear 9000lb it will cut out
maintenance is the secret to all winches
Paul
Tigerz11 10000lb Quickest & Most Powerful Electric Low Mount Recovery Winch on the planet today.
Dealers : http://www.tigerz11.com.au/distributors.html
Dealers : http://www.tigerz11.com.au/distributors.html
Re: Tiger11 Z winch install
Thanks Paul, you obviously dont like sleeping to much looking at your last post
cheers Daz
cheers Daz
If you can not get there in a 4wd its not worth looking at
Re: Tiger11 Z winch install
Thanks DAZ. Is the heavy black cable going to the yellow terminal on winch motor?DAZ wrote:here ya go
Re: Tiger11 Z winch install
No the black goes to the black point on winchdrr wrote:Thanks DAZ. Is the heavy black cable going to the yellow terminal on winch motor?DAZ wrote:here ya go
blue cable has replaced the yellow to the winch
bright red goes to battery
red with black tape goes to red on winch
hope that helps
cheers cheers Daz
If you can not get there in a 4wd its not worth looking at
Re: Tiger11 Z winch install
When does that new twin motor winch come out?
Braden Tagg of XRO Racing is scum and not to be dealt with. See here http://www.outerlimits4x4.com/viewtopic.php?f=10&t=223295
bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
bj73 build up thread http://www.outerlimits4x4.com/ftopic168809.php
Re: Tiger11 Z winch install
c'mon Paul speak up about the new winches, your answering the other questions! When can we get some specs, dimensions and $$$
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Posts: 1931
Joined: Sun Jun 22, 2003 10:29 am
Joined: Sun Jun 22, 2003 10:29 am
Location: Everything 4WD, 86 Camms Rd Cranbourne
Contact:
Re: Tiger11 Z winch install
Most winches remote controls operate the same way. A delay to start and a delay to finish.DAZ wrote:The one thig im not sold on is the remote control the winch dose not seem to stop as quick as when use via wire control.
Be particularly careful if your spooling the cable on in high speed with the remote control
Personally I only use the std controller or an in-cab switch.
My club
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
www.vfwdc.com
My store
Everything 4WD
86 Camms Road Cranbourne
www.everything4wd.com.au
sales@everything4wd.com.au
Phone: 03 59955055
Re: Tiger11 Z winch install
At this point in time i have decided to put them on holdhulsty wrote:c'mon Paul speak up about the new winches, your answering the other questions! When can we get some specs, dimensions and $$$
Twin Motor Winch
Im not happy with the wirring set up of the 2nd motor back to the control box.
Auto Clutch Winch
The control box also is not acceptable ,and our new control box is not compatiable with the Auto Clutch Winch
Paul
Tigerz11 10000lb Quickest & Most Powerful Electric Low Mount Recovery Winch on the planet today.
Dealers : http://www.tigerz11.com.au/distributors.html
Dealers : http://www.tigerz11.com.au/distributors.html
Who is online
Users browsing this forum: No registered users and 2 guests