Hi, just looking to put something together so i have an LPG guage on the dash. Looking to create my own from 9 LED's as I believe most tanks run a 90ohm sender from the tank.
Has anyone done this before? am I wrong about most tanks being 90ohm?
Are there any other ideas out there?
Thanks
Azz
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
LPG guages, looking for different ideas
Moderators: toaddog, TWISTY, V8Patrol, Moderators
LPG guages, looking for different ideas
1981 SWB FJ40
Re: LPG guages, looking for different ideas
autometer make gauges with 0-90 ohm for use with lpg if you are going a aftermarket dash
i used to run the 0-90 into the standard cruiser gauge worked fine but backwards
OEM Toyota fuel gauge resistance: Full = 17 +/- 2.1 ohms Half = 40 +/- 4.5 ohms Empty = 120 +/- 6.5 ohm
so really if you fitted a 20 ohm resistor inline the gauge would be quite accurate but backwards
i used to run the 0-90 into the standard cruiser gauge worked fine but backwards
OEM Toyota fuel gauge resistance: Full = 17 +/- 2.1 ohms Half = 40 +/- 4.5 ohms Empty = 120 +/- 6.5 ohm
so really if you fitted a 20 ohm resistor inline the gauge would be quite accurate but backwards
Who is online
Users browsing this forum: No registered users and 0 guests