Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Precleaner on GU factory snorkel?
Precleaner on GU factory snorkel?
Has anyone here got a precleaner to replace the factory ram head on their GU snorkel? I was wanting to fit one for outback touring but not sure what size etc would be best? Any help would be appreciated.
Cheers.
Cheers.
Re: Precleaner on GU factory snorkel?
Are you talking about a Donaldson pre-cleaner, If so I use a 10" one on my 4.2 GU but a 3lt would only need a 7" one.
Re: Precleaner on GU factory snorkel?
You may possibly be right about that ...BUT..DavePatrol wrote:Are you talking about a Donaldson pre-cleaner, If so I use a 10" one on my 4.2 GU but a 3lt would only need a 7" one.
I have a GQ RD 28 and I had fitted an 8" precleaner , but after a while of wondering why it wouldnt rev cleanly past 3200 revs (and blowing lots of smoke as well at these revs...I twigged that the precleaner was strangling it.
So I fitted the 10" one ...and it goes heaps better at higher revs...no smoke to speak of....and seems better on fuel as well. I would never have twigged to it at all....except I busted the bowl ...and had to drive around for a cuppla days without it....and it went heaps better without bowl.
Strange one ...but that is/was the case.
So check it out with the 3 litre...just might also be the case.
HTH.
Cheers Keith
Nuthin is ever the same once I own it !!
Re: Precleaner on GU factory snorkel?
Yeah, I originally had an 8" one and it sounded like it was sucking air through a straw, so changed to the 10" one. Don't know if the 4 Pot would suck as hard as the 6 pot ones.
Re: Precleaner on GU factory snorkel?
Thanks fellas, yes Donaldson pre cleaner, mine is a TD42 so I would be after a 10" one too I guess. DavePatrol do you have any pics of your's fitted?
Cheers.
Cheers.
Re: Precleaner on GU factory snorkel?
chunks wrote:Thanks fellas, yes Donaldson pre cleaner, mine is a TD42 so I would be after a 10" one too I guess. DavePatrol do you have any pics of your's fitted?
Cheers.
Cheers Dave.
Re: Precleaner on GU factory snorkel?
you need one of these.
Re: Precleaner on GU factory snorkel?
I read that these pre cleaners are not suitable for speeds over 80kmh due to the way the air is directed through them, anyone had any problems with this? Sooty where did you get that adapter from?
Re: Precleaner on GU factory snorkel?
i made it for i couldn't find anything suitable.chunks wrote: Sooty where did you get that adapter from?
daves adaptor appears to be standard though.
Re: Precleaner on GU factory snorkel?
Mine came from ARB, Maybe cheaper to buy the lot direct from Donaldson.sootygu wrote:i made it for i couldn't find anything suitable.chunks wrote: Sooty where did you get that adapter from?
daves adaptor appears to be standard though.
Re: Precleaner on GU factory snorkel?
Uni Filter do an oiled sock type filter that fits down inside both Airtec (ie Nissan) and Safari snorkels. Collected heaps of dust and gunk and reduces visible air filter contamination by heaps.
Refer page 12
http://www.uniflow.com.au/contents/medi ... retail.pdf" onclick="window.open(this.href);return false;
Refer page 12
http://www.uniflow.com.au/contents/medi ... retail.pdf" onclick="window.open(this.href);return false;
My friends aren't holding me back..... I'm pulling 'em forward.
Who is online
Users browsing this forum: No registered users and 123 guests