I have a pair of air locked bundera diff centres, and i want to run dirty 30s in the front diff.
The front centre is a high pinion, the rear is a low pinion.
I was thinking of using the rear centre in the front, and getting a spool for the rear. Would there be any disadvantage with a low pinion centre in the front?
if there is a disadvantage with a low pinion centre, can i pull the carrier out of the LP and fit it into the HP centre?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
lux diff centre Qs
Moderators: toaddog, Elmo, DUDELUX
lux diff centre Qs
4age zook ute in lots of bits
Re: lux diff centre Qs
You can't run the high pinion centre in the rear, the gears are reverse cut and are not very strong like that.
Don't you have a steering arm or tie rod that runs under the rear of the centre, that's why it's high pinion?
You could swap the lockers over there is no difference but can't swap the gears between lp and hp.
Don't you have a steering arm or tie rod that runs under the rear of the centre, that's why it's high pinion?
You could swap the lockers over there is no difference but can't swap the gears between lp and hp.
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Re: lux diff centre Qs
But why would you want to put a spool if you have a pair of air lockers... Just put them in
Brad
Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Re: lux diff centre Qs
low pinion won't go in the front because the tie rod runs underneath the high pinion, same as 80 series setup.
If you go high steer or crossover then you could run the low pinion in the front, but as said, running the hi-pinion in the rear won't be cool.
Sell the HP centre and buy a LP replacement, you'll probably be ahead on $$$ too. Or I'd be happy to do a straight swap LP for your HP if you want...
Sell the HP centre and buy a LP replacement, you'll probably be ahead on $$$ too. Or I'd be happy to do a straight swap LP for your HP if you want...
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Re: lux diff centre Qs
You will have panhard rod mount clearance issues running high steer in the front of a bundy if I recall correctly.
Re: lux diff centre Qs
sorry i forgot to mention im using the bundy centres in hilux housings, with high steer.
im not going to run the HP in the rear. I would be swapping the rear locker into the front centre, and putting a spool in the rear with the LP centre. if the car was going to be driven on road, i would keep both air lockers. If i sell one, i can use the money on a few other things for the car.brad 93hilux wrote:You can't run the high pinion centre in the rear, the gears are reverse cut and are not very strong like that.
yeah thats right, i forgot to mention the hilux housings earlierDon't you have a steering arm or tie rod that runs under the rear of the centre, that's why it's high pinion?
thanks, i was not sure on the gears. I will be getting new gears to lower the ratios.You could swap the lockers over there is no difference but can't swap the gears between lp and hp
4age zook ute in lots of bits
Who is online
Users browsing this forum: No registered users and 4 guests