I have a detroit that I thought was stuffed but now it was probbably just a CV.
Whats the go?
Chuck the centre in a vice and some axles in either side and then what?
Should the axle only turn one way and lock the other way?
Also has anyone got a good exploded diagram of a Hilux detroit locker?
I have another one I pulled to bits and I didnt realise how many bits were inside now Im worried about getting it all back together right.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
How do you bench teast an auto locker?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
How do you bench teast an auto locker?
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
www.teamcarnage.net
Re: How do you bench teast an auto locker?
From my understanding, one (either) wheel can turn faster than the input and the centre will drive the slower axle. What should happen on the bench is when turning the housing, both axle splines should turn with it and one (only one at a time) can "overrun" it. That's how it was explained to me anyway, hope that helps.
Don't take life too seriously...it isn't permanent.
Re: How do you bench teast an auto locker?
Badmav is correct. The detroit allows one wheel to overun the other but not be driven faster.
Check here http://www.eaton.com/ecm/groups/public/ ... 128312.pdf" onclick="window.open(this.href);return false;
Should be all the info you need.
Dan
Check here http://www.eaton.com/ecm/groups/public/ ... 128312.pdf" onclick="window.open(this.href);return false;
Should be all the info you need.
Dan
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Who is online
Users browsing this forum: No registered users and 121 guests