A few weeks ago, the alternator in my TB42 GQ croaked it. After replacing it, everything seemed fine (good 14.5V charge), but the next day, the battery was completely flat. Charged it up, and connected an ammeter to it. It's drawing 2.5amps with the ignition off. If I disconnect the white spade connector from the alternator, the current draw drops down to a few milliamps (consistent with my clock and radio). Any idea where I can start on this issue?
Thanks!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GQ ingition off high current draw
Moderator: -Scott-
Re: GQ ingition off high current draw
Internal or external regulator? Sounds like your field current may be on when it shouldn't be? I can only put that down to the regulator.
Re: GQ ingition off high current draw
Thanks for the reply.
It's a Hitachi with internal reg.
It's a Hitachi with internal reg.
Re: GQ ingition off high current draw
Hopefully, somebody will come along with a better idea than mine.
If not, can you take it back under warranty?
If not, can you take it back under warranty?
Re: GQ ingition off high current draw
Cheers.
Yeah, I bought it from Repco, so there shouldn't be too much drama with a return.
Yeah, I bought it from Repco, so there shouldn't be too much drama with a return.
Who is online
Users browsing this forum: No registered users and 14 guests