Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
strange electrical problem
Moderator: -Scott-
strange electrical problem
with the indicator on and the motor above 2000 rpm the charge light blinks with the indicator?? any ideas why it is doing this?
86 swb shitsubishi, basically stock.. snorkel and 31,s
Re: strange electrical problem
sounds like alternator to me mate
Re: strange electrical problem
its not the altinator mate its only on when i put the indicator on, and i have to be accelerating at the same time, altinator is still charging fine, does anyone else have any ideas?
86 swb shitsubishi, basically stock.. snorkel and 31,s
Re: strange electrical problem
i mis-read what you wrote, sorry.
sounds like it may be a instrument cluster issue. have you checked the earth/s to it too?
sounds like it may be a instrument cluster issue. have you checked the earth/s to it too?
Re: strange electrical problem
Change the indicator bulb and make sure all connections are good where it sits.
Dave
Dave
Re: strange electrical problem
This problem sounds like a bad earth on theinstrument cluster. The current in the direction indicator bulb (L or R) should go thru the bulb to earth, but if the earth is bad, it may be going thru other bulbs to their earths or somewhere else. Check the earthing on the cluster board. You may also have a broken track on the printed circuit board. Trace the tracks to and from the indicator bulbs. If you see a break, you can dab a bit of solder over it and it should be OK.
Who is online
Users browsing this forum: No registered users and 1 guest