Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Landrover Defender drive plates

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 163
Joined: Tue Oct 07, 2008 11:11 pm
Location: Sydney

Landrover Defender drive plates

Post by Breaker Brother »

Ok, so my defender, the drive plates and CV Splines are stuffed, more backlash than a fart in an elevator full of models :bad-words:

How much would I be looking at to have the CV's replaced and HD drive flanges installed ?
I've had quotes of up to $200 each just for the flanges
Ban Warning labels and let Darwinism rule![img]http://www.downunder4x4.net/forum/images/smilies/pray.gif[/img]
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Re: Landrover Defender drive plates

Post by ISUZUROVER »

Flanges were ~$250/pr from HiTough when I bought them. Ashcroft in the UK may be cheaper.

CVs - depends if you get OEM, cheaper copies, or super dooper ones from Ashcroft or Rovertracks.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Re: Landrover Defender drive plates

Post by Bush65 »

If you are running greased wheel bearings, then convert to oil lube for better wheel bearing and spline life. Should be plenty of info on the conversion here.
John
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 26 guests