Hi all just started taking the extractors of a 305 chev motor in my fj45 and have coolant leaking from the rear bolt when i took it out.
would this be the head or just a head gasket ???
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
head or head gasket
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Re: head or head gasket
Manifold bolt or head bolt?
If its just comming out the manifold bolt i wouldnt be too concerned The bolt hole has prob been drilled to deap and has entered the water galery. Just make sure you use some sealent on the bolt when you re-fit it.
If its just comming out the manifold bolt i wouldnt be too concerned The bolt hole has prob been drilled to deap and has entered the water galery. Just make sure you use some sealent on the bolt when you re-fit it.
Re: head or head gasket
yep the manifold bolt.
So it should be ok then ???
So it should be ok then ???
Re: head or head gasket
Yep, as ruff said, the bolt hits the water jacket, just seal it up and pop it back in. I've had this happen a few times.
Dave
Re: head or head gasket
Thanks guys all done and fixed,used some locktite .
Who is online
Users browsing this forum: No registered users and 29 guests