Ln65 hilux

[the_4br]

I'm trying to put my ifs rears in but I can't get pin out of the front
of the Sping I've tried to fill it with wd40 but I'm a bit stuck 4 ideas
iv heard of ppl using fire to burn the bush out but im not a big fan
of my Truck on fire even if it is "controled" so any ideas would b great


James

[dad]

Are you trying to get the pin out to get the old springs out of the car, or get the bush out of the ifs spring?

[DUDELUX]

The bushes are pressed into the spring(hanger end), take the springs down to the local mechanics(make sure they have a hydraulic press) and get them out in about 30seconds.

[georgey]

he said he cant get the pin out.
have you tried taking weight off the car.
Jack it up slowly while getting someone to tap it with a hammer until its sort of loose.
Are you the james that works at all 4x4?

[DUDELUX]

Sorry mate, I misread it.
But try what Georgey said.

[the_4br]

Yer I've got all the weight off them every other bolt is out just these
two left iv belted the left hand one with a hammer and it wont come out
but the fuel tank is in the way of the right hand side one normally I use
the oxy at work but car is at home and I don't really want use the oxy
on my car

[the_4br]

Yer trying to get the pin out to get the spring out

[ZOOK60]

Try using a claw hammer or hit a big srew driver into the other side of the pin. Where it has the flat plate on it and it will leaver out .

[CTZOOK]

I ended up using the angle grinder on mine and cutting the pin between the hanger & spring, then replaced the pin.

[the_4br]

I ended up Putin some heat in to it and twisting it and it came out
thank god