Hi all,
Can anyone tell me the O.D. and width of a Patrol Rear Control Arm bush?
I need it so I can find some steel in the right size
Thanks
Ross
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Patrol Control Arm Bush Size
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Re: Patrol Control Arm Bush Size
14mm bolt
press in to a 50.0mm bore
tube on control arm should be 46mm wide.
use hydraulic cylinder tube 50mm id x60mm od.
some dodgy people use seamed pipe but that is ... dodgy
press in to a 50.0mm bore
tube on control arm should be 46mm wide.
use hydraulic cylinder tube 50mm id x60mm od.
some dodgy people use seamed pipe but that is ... dodgy
Who is online
Users browsing this forum: No registered users and 144 guests