just wondering what the best bottom end to use in a series 1 16v baleno mpfi conversion onto a g13b block would be
ideally i would like compression around the 10:1 mark.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
baleno 16v head on g13
baleno 16v head on g13
_____
[olllllo]
[olllllo]
Re: baleno 16v head on g13
I may be wrong but 8valve pistons don't normally like 16valve heads. I do know a 8valve head will go onto a 16valve block. You may be able to swop in some over size GTI pistons. Or you could just use a GTI block to start with.
As I said I may be very wrong its just the mechanic in me thinking about how the valves/pistons work.
As I said I may be very wrong its just the mechanic in me thinking about how the valves/pistons work.
Re: baleno 16v head on g13
What is his name?V.W.Dave wrote: its just the mechanic in me
Re: baleno 16v head on g13
yeah you need to run efi pistons to run an efi head (theyre different)...
if im not mistaken, don't the 1.3L engines run 10:1 compression standard?
if im not mistaken, don't the 1.3L engines run 10:1 compression standard?
The worst thing about censorship is ███████.
Re: baleno 16v head on g13
hmmm my understanding was that it is possible to run an 8v head on a 16v bottom end but it makes it an interference engine
meaning if the timing belt snaps then the valves hit the pistons ?
meaning if the timing belt snaps then the valves hit the pistons ?
_____
[olllllo]
[olllllo]
Re: baleno 16v head on g13
can i just slap a carby and sierra manifold on a jimny g13bb ?
_____
[olllllo]
[olllllo]
Re: baleno 16v head on g13
No. Ports are different.
AFAIK there are carby 16V swifts (?) In any case, there are plenty of TBI 16V swifts, so a carb (ideally vitara) could be adapted, but why? surely the EFI is the answer.
G13BB is really what you're talking about.
Steve.
AFAIK there are carby 16V swifts (?) In any case, there are plenty of TBI 16V swifts, so a carb (ideally vitara) could be adapted, but why? surely the EFI is the answer.
G13BB is really what you're talking about.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Re: baleno 16v head on g13
ok, sorted 8v 1.3 head fits no probs on 1.6 16v bottom end
baleno 1.6 head and inj fits on g13b block.
baleno 1.6 head and inj fits on g13b block.
_____
[olllllo]
[olllllo]
Re: baleno 16v head on g13
^^ thats correct - its the other way around that doesnt work (8v bottom end with 16v head).
The worst thing about censorship is ███████.
Who is online
Users browsing this forum: No registered users and 25 guests