Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Tee piece adaptor to suit oil pressure sensor 80#
Moderators: toaddog, Elmo, DUDELUX
Tee piece adaptor to suit oil pressure sensor 80#
Right have given up on chasing an adaptor plate for oil filter and am chasing a suitable tee piece to plumb to the oil pressure sensor in my 80 1HDT. Where can i chase one up as it would be metric thread being jap and don't want to skimp on quality to run a decent pressure guage.
Re: Tee piece adaptor to suit oil pressure sensor 80#
Mate, just go to your local enzed, pirtek etc. and check out their fittings. When i fitted an aftermarket oil pressure gauge to my 1HD-FT i removed my oil pressure sender (was replacing it anyway) and took it, along with the new gauges sender, down to the nearest pirtek and said i need a tee-piece fitting to attach both of these too and a fitting for the block. Not sure on thread details i used, but they had everything i needed and it all screwed together great. Worth a try! 
Dan
1979 BJ40
1979 BJ40
Who is online
Users browsing this forum: No registered users and 15 guests