Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series front diff

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 441
Joined: Fri Feb 06, 2009 6:47 am
Location: jimboomba

Re: 80 series front diff

Post by 84sloth »

those diffs look like 40 series. going by the pinion flange..
My hj47-80series build
[code]http://www.outerlimits4x4.com/viewtopic.php?f=16&t=208404[/code]
Top
Posts: 986
Joined: Tue Nov 11, 2008 7:17 pm
Location: Brisbane

Re: 80 series front diff

Post by TheBigBoy »

Well thats crap isnt it. Goes to show not to just trust a 4x4 wrecker. They are too old now to bother doing anything about it. I didnt even measure them until yesterday. And the penny still didnt drop then either. I just assumed they where what I asked for.

AREWELL... Thats why this site is a weath of knowledge
Top
Posts: 352
Joined: Sun Aug 30, 2009 1:00 pm
Location: Australia

Re: 80 series front diff

Post by GO79 »

84sloth wrote:those diffs look like 40 series. going by the pinion flange..
x2 on the flange looking same as 4x series

The wreckers were proberly stuck in the false mind frame that all 75 series cuiser run big low pinion diffs front and back ,
4x series diffs fit in front and back of 85-89 75 series as I've done this before.
The 80 series front and 105 series front are same size diff but different ratio and Axel spline count
Top
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: 80 series front diff

Post by 80's_delirious »

GO79 wrote:
The 80 series front and 105 series front are same size diff but different ratio and Axel spline count

they are different ratios yes, but axles are the same, the centres are interchangeable between 80s and 105s
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest