As in my previous thread going to put the 4.2 diesel motor in my GQ that had a the 3lt petrol. I know the chasis mounts for the engine mounts are in a different location. But are the mounts themselves different, IE do I need to find a pair of a diesel chasis? If so if anyone has a pair drop me a pm.
Also the vehicle will be a tourer, not lots of hard off roading. Lots of dirt road and some bush stuff. Any recomendations for a replcement suspension set, want something good that will las me.
If anyone has up graded to a lifted set up for more serious stuff, I would be interested in the take off set up if in good nick
Thanks
Johno
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Addvise on suspension & chasis mounts
Re: Addvise on suspension & chasis mounts
i believe the mounts are different and you will need the mounts off the diesel chassis unless you fab your own.
same with gearbox crossmember.
same with gearbox crossmember.
Who is online
Users browsing this forum: No registered users and 0 guests