Just wondering if the input shaft spline count is the same between the G52 and R150f gearboxs and also if the protruding length of the input shaft outside the gearbox is the same between the two also.
Cheers
Peter
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
G52 and R150f input shafts
Moderators: toaddog, Elmo, DUDELUX
G52 and R150f input shafts
What do we want? TIME TRAVEL! When do we want it? THAT'S IRRELEVANT!
Re: G52 and R150f input shafts
G52 has 21 spline, R150f has 23 spline.
I'm sure thats right......
I'm sure thats right......
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Re: G52 and R150f input shafts
that was my impression also the local gearbox fella was trying to tell me they were both 23 spline and I could use the same clutch when converting between the two.
Last edited by UhhOhh on Fri Feb 18, 2011 7:23 pm, edited 2 times in total.
What do we want? TIME TRAVEL! When do we want it? THAT'S IRRELEVANT!
Re: G52 and R150f input shafts
Man I think I'm wrong. Thinking of transfer case. sorry dude.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Re: G52 and R150f input shafts
No worries at least you caught me before I went back to the gearbox guy and tell him willy lux told me they were different. 
Anyone else?
Anyone else?
What do we want? TIME TRAVEL! When do we want it? THAT'S IRRELEVANT!
Re: G52 and R150f input shafts
same shaft i bud both 29.8 x 21 well mine are anyway
Re: G52 and R150f input shafts
80gus wrote:same shaft i bud both 29.8 x 21 well mine are anyway
Awesome who would of thought a gearbox specialist knew what he was talking about now I'll save a few dollars on the conversion
Thanks!What do we want? TIME TRAVEL! When do we want it? THAT'S IRRELEVANT!
Who is online
Users browsing this forum: No registered users and 1 guest