Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
2.8 3L diesel crankshaft
Moderators: toaddog, Elmo, DUDELUX
2.8 3L diesel crankshaft
does any one know if the 2.4lt crank will fit the 2.8 3L motor, as i have been told the block is the same.
Re: 2.8 3L diesel crankshaft
afaik blocks are the same. i havn't checked to see if deck to crank bore is the same tho.
the cranks and pistons are different, rods are the same. ie 2.4 crank needs 2.4 pistons and 2.8 crank needs 2.8 pistons.
why not look at 5l ?
the cranks and pistons are different, rods are the same. ie 2.4 crank needs 2.4 pistons and 2.8 crank needs 2.8 pistons.
why not look at 5l ?
Who is online
Users browsing this forum: No registered users and 66 guests