Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

100 series 4.5 petrol to 1hd-fte

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 2
Joined: Fri Oct 29, 2010 12:39 pm

100 series 4.5 petrol to 1hd-fte

Post by hzjcruiser »

Hi. Im considering getting a 4.5 petrol gxl 100 series as they are going pretty cheap nowdays and converting it to a 1hd-fte engine. I know the engine mounts, sump,fuel system ect are different but thats no big deal for me. I just need to know if the 1hd-fte will bolt straight up to the gearbox (manual) thats in the 4.5 petrol 100 series cruisers. Also, if i cannot find a manual version is it a big deal to get the 4speed auto to work with the 1hd-fte or convert the car from auto to manual?
Thanks
Posts: 243
Joined: Thu Jul 15, 2004 9:21 am
Location: Townsville

Re: 100 series 4.5 petrol to 1hd-fte

Post by Dane »

Contact Thrashlux mate.
Posts: 168
Joined: Sun Nov 30, 2008 4:44 pm
Location: Sydney

Re: 100 series 4.5 petrol to 1hd-fte

Post by popeyehj60 »

the manuals are getting hard to find.
if u were going to stick with the auto then ud slot the 5 speed in and get rid of the 4 speed slushbox with the motor.
to do it properly with all the parts needed is about a 20-25,000 dollar conversion depending on what else needs adjusting on the vehicle to suit the new motor and what conditon the motor is.

its not a conversion id leave to someone to do in there backyard. alot of cost to have it all go wrong.
Posts: 5
Joined: Sun Jun 21, 2009 8:03 pm
Location: Buronga NSW (near Mildura)

Re: 100 series 4.5 petrol to 1hd-fte

Post by searchin oz »

Theres a few that have done the conversion over on LCOOL. maybe have a look there and ask the relevant people.
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Re: 100 series 4.5 petrol to 1hd-fte

Post by oldmate »

There are two issues if you are thinking about bolting it up to the 4speed from a 1fz.

1. the link between the gearbox and engine that cuts power during shifting (for a smoother shift) may not initially work. Gettting this to work could be a hassle.

2. The shift timing for the petrols is different at full throttle due to the red line difference with the diesel engine. If you floor it at around 90kph, the auto will go back to second sending the engine to near 5k rpm. Similary if you floor it off the line, the auto may not up shift at redline because the rpm will be lower than expected.
The worst part about being told you have Alzheimer's, is that it doesn't just happen once.
Post Reply

Who is online

Users browsing this forum: No registered users and 12 guests