Hi guys, i have an old 60 that im currently cleaning up a bit and just as of this week it has been turning itself off after the first start... It has a 2h in it and i have replaced the edic motor relay as the old one was rooted... I also found a cut earth wire that i have fixed up but i cant see any of this being any part of my problem... Any suggestions on what could be causing this would be a great help even if iv already checked over it...
Thanks jamie
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 series stopping on first start
Moderators: toaddog, Elmo, DUDELUX
60 series stopping on first start
I mean, a turbo is great and all, but i'd rather be blown...
Re: 60 series stopping on first start
If they don't build oil pressure within a certain amount of time e.g. 10 secs the motor switches off. Is getting oil pressure straight away on start up?
Re: 60 series stopping on first start
umm thats one thing i havent checked but i will definately look at...
It runs well for about 30 seconds an then drops out but if i give it a little rev or two it sometimes stays running...
Ill look into mate cheers for the tip
Much appreciated...
It runs well for about 30 seconds an then drops out but if i give it a little rev or two it sometimes stays running...
Ill look into mate cheers for the tip
Much appreciated...
I mean, a turbo is great and all, but i'd rather be blown...
Re: 60 series stopping on first start
x2 on what chunks said
mine did this before the rebuild.
had to rev it a little to bring oil pressure up.
mine did this before the rebuild.
had to rev it a little to bring oil pressure up.
03 HDJ100R GXL / 94 FJ45-80
Re: 60 series stopping on first start
i just started the od girl up and it cut out again
the oil pressure gague was low but when i started it again and bought the oil pressure up with revs it seemed to be fine...
I guess this has solved my problem so thanks guys for the info... Its much appreciated...
Have a good one and fourby on!!!
the oil pressure gague was low but when i started it again and bought the oil pressure up with revs it seemed to be fine...
I guess this has solved my problem so thanks guys for the info... Its much appreciated...
Have a good one and fourby on!!!
I mean, a turbo is great and all, but i'd rather be blown...
Who is online
Users browsing this forum: No registered users and 0 guests