Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
How to make an 99 IFS Lux tuff ??
Moderators: toaddog, Elmo, DUDELUX
How to make an 99 IFS Lux tuff ??
Hey guys, any help you can give me will be muchly appreciated?
I have a 99 model Single cab trayback Hilux, IFS set up with 3.0L non turbo with extractors..
So far I've got a 2 inch suspension lift and then other basics like, spotties, snorkel, 31" muddies etc
I wanna make this truck go anywhere my mates do, but I don't know too much about Mods and such..
I wanna put 33's under it, and I've been told I will need a body lift, so how much is that gonna set me back and how much of a lift will I need? I wanna put a rear locker in it, so I needa know what brand would be best to get, or even a price comparison of a few types? I wanna modify the rear leafs to give the back wheels some more down travel so what would be involved in that? And I want to get a winch, so what types you guys think are the best and pricage on them?
I also wanna run checkerplate over the back tray cause I dont really wamma cut it into a comp tray but I want it lookin pretty good:)
Any help anyone can give me would be muchly appreciated or anything else you think I could do instead of or along with these mods!
Thanks ppl..
Mitch
I have a 99 model Single cab trayback Hilux, IFS set up with 3.0L non turbo with extractors..
So far I've got a 2 inch suspension lift and then other basics like, spotties, snorkel, 31" muddies etc
I wanna make this truck go anywhere my mates do, but I don't know too much about Mods and such..
I wanna put 33's under it, and I've been told I will need a body lift, so how much is that gonna set me back and how much of a lift will I need? I wanna put a rear locker in it, so I needa know what brand would be best to get, or even a price comparison of a few types? I wanna modify the rear leafs to give the back wheels some more down travel so what would be involved in that? And I want to get a winch, so what types you guys think are the best and pricage on them?
I also wanna run checkerplate over the back tray cause I dont really wamma cut it into a comp tray but I want it lookin pretty good:)
Any help anyone can give me would be muchly appreciated or anything else you think I could do instead of or along with these mods!
Thanks ppl..
Mitch
Got the NUTZ to follow my RUTZ?
Re: How to make an 99 IFS Lux tuff ??
2" bodylift,
Auto lockers front and rear,
agressive 33" muddies,
2" front suspension lift (dial up the torsion bars,
2 to 3" rear suspension lift,
Would be a good start and will fit 33s
Auto lockers front and rear,
agressive 33" muddies,
2" front suspension lift (dial up the torsion bars,
2 to 3" rear suspension lift,
Would be a good start and will fit 33s
Re: How to make an 99 IFS Lux tuff ??
Thanks mate, which of that would be the first things I should do, abit strapped for cash atm...
Got the NUTZ to follow my RUTZ?
Re: How to make an 99 IFS Lux tuff ??
I vote the bodylift first as it will need to be approved by QT so it's best not to have too many mods done when you take it over the pits. 50m is the maximum legal in qld so I would go 50mm. A shop will charge under 1k. A kit can be purchased for about $250-$350 can be diy easy if you have a hoist at your disposal.
Plenty of people don't like bodylifts but I think they are a great way to get cheaper clearance, a better COG and result in a nicer car to drive. (when compared to using a big 4" or more suspension lift)
Plenty of people don't like bodylifts but I think they are a great way to get cheaper clearance, a better COG and result in a nicer car to drive. (when compared to using a big 4" or more suspension lift)
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Re: How to make an 99 IFS Lux tuff ??
Thanks heaps man, I was leaning towards body lift and bigger tyres...How would I go about adjusting my rear leafs to get max downtravel for rear end?
Got the NUTZ to follow my RUTZ?
Re: How to make an 99 IFS Lux tuff ??
I vote for body lifts every time, if you go all suspension lift to clear your tires then you raise the whole car chassis included, if you just do the body lift you keep a lower COG.
Re: How to make an 99 IFS Lux tuff ??
Rather than a body lift, you could cut the shit ouf of the guards to fit the tyres. That will look tough gives the impression that you don't care about your car let alone other peoples cars. Other motorists will move out of your way and depending on their personality type, might feel a little scared in side. that's just my theory on the matter.
The worst part about being told you have Alzheimer's, is that it doesn't just happen once.
Re: How to make an 99 IFS Lux tuff ??
Haha, that sounds like a plan oldmate
But Cuttin the guards that much will probs look a bit shit in the end.
Superior Engineering do a 2" body liftkit for $400, worth it if i do it myself?
But Cuttin the guards that much will probs look a bit shit in the end.
Superior Engineering do a 2" body liftkit for $400, worth it if i do it myself?
Got the NUTZ to follow my RUTZ?
Re: How to make an 99 IFS Lux tuff ??
jeez theyve gone up a bit. i remember buying a bodylift kit off suspension stuff. cost me $120!
My hj47-80series build
[code]http://www.outerlimits4x4.com/viewtopic.php?f=16&t=208404[/code]
[code]http://www.outerlimits4x4.com/viewtopic.php?f=16&t=208404[/code]
Re: How to make an 99 IFS Lux tuff ??
I think 350 to 400 is going retail rate these days.
What do you get in your kit, body blocks, bolts, steering shaft extension, radiator drop brackets?
What do you get in your kit, body blocks, bolts, steering shaft extension, radiator drop brackets?
Re: How to make an 99 IFS Lux tuff ??
Get it sas'd, then your mates will have to try and keep up with you
Re: How to make an 99 IFS Lux tuff ??
I bought body lift blocks off ebay or Locktup (can't remember which 1) for like $8 each around 12 months ago, then went down to coventry fasteners and got the nuts, bolts and washers for around $5. 2" body lift will cost you less then $50 if you shop around and install it yourself!!
Dual Cab Hilux, Locked, Lifted & commo V6 rolling on 37's.
***NOW FOR SALE***
PM FOR DETAILS
***NOW FOR SALE***
PM FOR DETAILS
Re: How to make an 99 IFS Lux tuff ??
where is the like buttonoldmate wrote:Rather than a body lift, you could cut the shit ouf of the guards to fit the tyres. That will look tough gives the impression that you don't care about your car let alone other peoples cars. Other motorists will move out of your way and depending on their personality type, might feel a little scared in side. that's just my theory on the matter.
Who is online
Users browsing this forum: No registered users and 61 guests