Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
TJM winch cradle
Moderators: toaddog, Elmo, DUDELUX
TJM winch cradle
Guys has anyone got a pic of the TJM winch cradle for the 80 series. I am going to make one up but I'd like to see how TJM did it. I'm wondering if they did it in such a way to incorporate the adjustment points for the alloy mounts. As I see it if I just make something up it needs to come up from the outside of the chassis rails if it is to pick up several of the mounting bolts but then this could limit any available adjustment in the bar itself. The only way I can see they could keep the adjustment was if they only had it bolted to teh inside of the alloy bar mounts which means it only sandwiches them with that section of the outer mount which means the cradle and thefore winch are only held by the 3 bolts either side that hold the alloy mounts and the 3 bolts to the side of the chassis rails which are the smaller of all the mounting bolts.
Who is online
Users browsing this forum: No registered users and 9 guests