hi im after a link or some one half smart to show me a good wiring diagram to run 2 spal 14'' thermo fans. i have a earthed out temp switch 93' on 85' off and would also like a 3way switch with manual over ride for on/off and auto options. would it be a over kill to run them on there own relay in case 1 dies or not needed. i think the fans pull about 10~15 amp each.
thanks scott
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
thermo fan wiring diagram
Moderator: -Scott-
Re: thermo fan wiring diagram
other may have adifferent idea
batt *ve into 30
ign power into 86
out of 85 run to middle of switch
one side of the switch to the temp switch then to ground
the other side of the switch goes to ground
87 or 87a to fan which ever one it is.
hope that helps
batt *ve into 30
ign power into 86
out of 85 run to middle of switch
one side of the switch to the temp switch then to ground
the other side of the switch goes to ground
87 or 87a to fan which ever one it is.
hope that helps
home brew cooling in progress
Who is online
Users browsing this forum: No registered users and 5 guests