Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

12A Auto SPOA RUF WT/NT Buildup?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 20
Joined: Wed May 02, 2007 11:21 pm
Location: Canberra

12A Auto SPOA RUF WT/NT Buildup?

Post by MazdaSpater »

Anyone interested in a buildup thread as above?
My wife went to Darwin for two weeks, leaving me home alone with a plasma cutter and a mig. And a NT Zook and a WT wreck.

MoooahaHaHaHa.
V.W.Dave said:
But here is the beauty of this entire thing..... Its your car you are the one that has to drive it. Make it how you want it.
Posts: 1183
Joined: Tue Sep 22, 2009 10:24 pm
Location: In the Hills With a Riffle

Re: 12A Auto SPOA RUF WT/NT Buildup?

Post by V.W.Dave »

All in 2 weeks hmmm good luck.



















But I would put it in the correct section if you want it to stay on here.
Posts: 20
Joined: Wed May 02, 2007 11:21 pm
Location: Canberra

Re: 12A Auto SPOA RUF WT/NT Buildup?

Post by MazdaSpater »

Sad but true.
My new front diff, bent on left hand end.
My new rear, seems to have broken side gears.
Anyone got some WT diffs in Canberra?
Three days past the deadline, runs and drives but some shocking noises from the rear.
Not buying Zook wreck from Alco braindeads again.
No Faith.
V.W.Dave said:
But here is the beauty of this entire thing..... Its your car you are the one that has to drive it. Make it how you want it.
Posts: 78
Joined: Sun Apr 25, 2010 8:53 pm
Location: Back behind the bunting again

Re: 12A Auto SPOA RUF WT/NT Buildup?

Post by ROB ZUK »

MazdaSpater wrote:Sad but true.
My new front diff, bent on left hand end.
My new rear, seems to have broken side gears.
Anyone got some WT diffs in Canberra?
Three days past the deadline, runs and drives but some shocking noises from the rear.
Not buying Zook wreck from Alco braindeads again.
No Faith.
I probably have what you need. PM sent.
Posts: 3385
Joined: Fri Sep 17, 2004 8:26 pm
Location: Melbourne

Re: 12A Auto SPOA RUF WT/NT Buildup?

Post by shakes »

need photo's. Have a bit of an interest of a 12a auto sierra
Posts: 20
Joined: Wed May 02, 2007 11:21 pm
Location: Canberra

Re: 12A Auto SPOA RUF WT/NT Buildup?

Post by MazdaSpater »

Got a heap of photos, trying to get it going, then will do a buildup thread.
Got a bare axle housing, building it up, Thanks Rob.
Seems promising to drive. Only had it to 4000 Rpm, much more power than stock.
V.W.Dave said:
But here is the beauty of this entire thing..... Its your car you are the one that has to drive it. Make it how you want it.
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests