i want to fit the 4.11 diff gears that came out of my 1997 GQ ute into my 2006 GU wagon. Was thinking of doing it when i fit the lockers?
Will these bolt straight in?
Thanks,
Welchy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
will diff gears from GQ fit into GU?
will diff gears from GQ fit into GU?
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Gladstone4wdclub.com.au
Re: will diff gears from GQ fit into GU?
yes. as long as your rear ute diff is a 233 not a 260
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
Re: will diff gears from GQ fit into GU?
What gears do have in it at the moment?WelchyGQ wrote:i want to fit the 4.11 diff gears that came out of my 1997 GQ ute into my 2006 GU wagon. Was thinking of doing it when i fit the lockers?
Will these bolt straight in?
Thanks,
Welchy
David
Nissan Patrol GU, Wagon
Re: will diff gears from GQ fit into GU?
the wagon has 3.9 gears in it atm
Welchy
Welchy
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Gladstone4wdclub.com.au
Re: will diff gears from GQ fit into GU?
thehanko wrote:yes. as long as your rear ute diff is a 233 not a 260
How do i tell?
I thought it might be onthe compliance plate but i cant see it. Am i right in thinking the 233 and 260 are the diamter of the ring gear?
The gears are already out of the car so i could measure them if thats the case.
Thanks,
Welchy
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Gladstone4wdclub.com.au
Re: will diff gears from GQ fit into GU?
If you havent already thought wow the back diff is big then they will both be 233 
if they are already out of the car then simply compare front and rear, if they are the same size then the are 233 (95% likely).
looking at the housings the bottom of a 260 is flatter on the bottom like \_/ and the 233 is round.
if they are already out of the car then simply compare front and rear, if they are the same size then the are 233 (95% likely).
looking at the housings the bottom of a 260 is flatter on the bottom like \_/ and the 233 is round.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Goto *
Re: will diff gears from GQ fit into GU?
Look at the info plate under the bonnet. There is a coding, eg HG41.
HG= H233, HH= H260. Number = ratio. eg 39= 3.9:1, 41= 4.1:1, etc.
HG= H233, HH= H260. Number = ratio. eg 39= 3.9:1, 41= 4.1:1, etc.
Wanted:
-FG Falcon sump & oil pickup (6 cylinder)
-FG Falcon sump & oil pickup (6 cylinder)
Who is online
Users browsing this forum: No registered users and 2 guests