hi guys, a mate asked me if i could find out if a 100 series 4.5litre six will be a straight bolt in to an 80 series which has a 4.5litre six. the 80's motor has given up the ghost and he can get a good price on a 4.5 out of a 100.
any help would be great, or anything to watch for, any tips or trick??
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
100 series motor to fit 80 series questions
Moderators: toaddog, Elmo, DUDELUX
Re: 100 series motor to fit 80 series questions
Yes, will fit but you will have to use the 100 series computer and wiring harness. Otherwise you will have to put the 80 series electrics on the 100 series motor but that would be alot of f*@king around.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Re: 100 series motor to fit 80 series questions
Cheers mate, he's got the a motor, harness, computer, coil pack. The main thing we are worried is the gear box and bell housing. The 80 series is a 5 speed, is the stud pattern on the rear of the the motor the same on all the 4.5 petrols?
Re: 100 series motor to fit 80 series questions
yes it will bolt to the gearbox fine
Who is online
Users browsing this forum: No registered users and 1 guest