Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

A/C wiring to canister

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

A/C wiring to canister

Post by 4sum4 »

Got a secondhand A/C for my 84 lux and the main unit in the dash (its the OME for hilux) has 2 wires coming of that would go to the canister in the front grille,But the canister i got dosn`t have the terminals for the wires
What can I do with the origanal wires
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Posts: 613
Joined: Sun Jun 28, 2009 1:44 pm
Location: qld

Re: A/C wiring to canister

Post by ledgend80 »

mate the cannister you are talking about is known as a reciever dryer. and i suggest you go get a brand new that will have a pressure switch in it. but don't connect it to the system until you are ready to get it gassed up.
home brew cooling in progress
Posts: 103
Joined: Fri Feb 27, 2009 12:48 pm
Location: ROCKHAMPTON

Re: A/C wiring to canister

Post by kbv8ute »

Like before mentioned this is a receiver dryer. The wires going there are for a high pressure safety switch. You can connect them together to bypass the switch but is likely to cause damage on a hot day when the head pressure is high.(350 psi+) The switch is designed to cut out when the pressure is to great preventing a/c system pipe burst. A new drier is only around $20 and have a fiiting but do not fit it until you are ready to vacum pump the system and charge with gas
Ford Maverick ute, gen 3 boost,kewish auto, twin locked 17"kmc enduro bead lock rims, POW 84 winch wiring
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests