Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Optimal rim width for tyre bagging

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 18
Joined: Wed Nov 26, 2003 12:02 pm
Location: Malvern (Melbourne) VIC

Optimal rim width for tyre bagging

Post by Stubby »

What effect does the width of the rim have on the tyres ability to bag?

Does a narrower rim (say, 8in) encourage more bagging cause of the tyre bulging or does a 10in wide rim let the side wall work better?

Maybe there's no advantage to either - any theories?
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

bead lox and 5 psi :D

use what ever rim ... it'll baaaaaag
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

Stubby, what size tyre, and what type of vehicle?
Peter
Top
Posts: 18
Joined: Wed Nov 26, 2003 12:02 pm
Location: Malvern (Melbourne) VIC

Post by Stubby »

droopypete wrote:Stubby, what size tyre, and what type of vehicle?
Peter


I got 33in MTRs on 15x8 rims under a 47 Series Cruiser Ute but I'm asking the question in general with the "what next?" question in mind (thinking 35 - 37in MTRs).

Is there any advantage in getting 10in over 8in wide rims for 12.5in wide tyres?
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

i have MT/r 35z on 15x8s on a gq ute .... 13 psi she bags sweet
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 1508
Joined: Thu Jun 26, 2003 9:48 am

Post by MQ080 »

12.5's bag better on 8's than 10's because of the diffrence in withs, but also with a 10 inch rim you have alot more risk of beading the tyre

I had 33's and 35's on my 15x8's and had them as low as 10psi without beadlocks without a drama on a MQ... I doubt you will have any either
Top
Posts: 5457
Joined: Sun Oct 27, 2002 9:49 am
Location: Sydney

Post by Shorty40 »

If you are going to stick to a 12.5 tyre, then stay with an 8" rim. I run my 38x12.5 TSLs at 6psi (no beadlocks) and they bag nicely. 35 BGFs previously on the same 15x8 were just as good.

As MQ080 said, there is a greater risk of rolling a bead on a 10" rim with 12.5" tyres.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests