Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

chev extractor question

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 39
Joined: Mon Jun 23, 2003 4:37 pm
Location: Jimboomba

chev extractor question

Post by blackmav8 »

g'day all. just wondring if extractors off a chev 327 would fit a 305 chev? :?:
Rob

FOR SALE!!! SWB Mav. 4 in lift. 2 inch body lift. Lockers. 305 Chev conversion and dents. PM OR EMAIL FOR DETAILS, OR FOR SALE SECTION,And now a Sierra to play with.
Top
Posts: 89
Joined: Thu Dec 26, 2002 7:57 pm
Location: NZ

Contact:
Contact Trickster

Post by Trickster »

ahh... should do?
I'm not 100% but my'Genies' came off my 305 and bolted straight up to my 383. Mind-you, isn't it just the insides that are different? Bore and stroke etc.
Try it and find out :!: :D

The thing i most remember about going from the 'Rams horns' to the 'Extractors' was the noticable rise in engine revs from the free flowing new zorst. at least 500rpm. Cool. :armsup:

My 0.2c
Phil
[color=green][b]"Common sense is not that common"[/b][/color]
Top
Posts: 1361
Joined: Thu Oct 24, 2002 8:47 pm
Location: Now in a happy place.

Post by Cheezy4x4 »

Should do, but depends on if they have straight or angled plug heads. :?:
NOW ABLE TOO SAY WHAT I WANT WITHOUT FEAR OF LOOSING SALES.
The person who says it cannot be done should not interrupt the person doing it.
Top
Posts: 4
Joined: Tue Mar 16, 2004 6:27 pm
Location: brisbane

chev extractor question

Post by xxxtreme »

from the reserch i have done for you this should all be ok but it will depend on the angle of your plug heads, call me with specs i should be able to find out. have fun
XXXtreme drive hard, at home and in the bush
Top
Posts: 4
Joined: Tue Mar 16, 2004 6:27 pm
Location: brisbane

Post by xxxtreme »

ive been informed by our new guy who races boats that unless you have unique heads, they should bolt straight on, it will be the angle of your wrap around and down that you may have to customise keep smiling big boy
XXXtreme drive hard, at home and in the bush
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

Cheezy4x4 wrote:Should do, but depends on if they have straight or angled plug heads. :?:


100% accurate reply
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests