Had a quick search couldn't find anything. Very soon I'm about to start building a new tube winch batter for my 86 model hilux. Was just wondering what thickness plate do you guys think. Was leaning toward 3mm with bracing.
Also what tube thickness do you use? It's going to be 2" tube. Haven't thought much about thickness until now.
Cheers cohen
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Winch bar specs
Moderators: toaddog, Elmo, DUDELUX
Winch bar specs
93 duel cab lux. 2.8 TD twin locked. Big tyres, little lift. Wide stance. Barwork and build up under way
Re: Winch bar specs
I'm no expert but just medium wall tube (3.2) is heaps and easy to get. I generally use 6mm for mount plates, And 2mm sheet to fill bits in...
Winch challenges- Boring the world for way too long....Oh wait, just australia...
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=189839
http://www.outerlimits4x4.com/viewtopic.php?f=16&t=189839
Re: Winch bar specs
Was um shore on filling in the gaps. Thinking diamond plate will make the bar then try it for looks.
93 duel cab lux. 2.8 TD twin locked. Big tyres, little lift. Wide stance. Barwork and build up under way
Re: Winch bar specs
Whatever you do don't dimple die every bit of flat plate that's on the winch bar, it's will come out looking like a mutant cheese grater/ bull dozer..... 
Posts: 689
Joined: Sat Oct 09, 2010 5:12 pm
Joined: Sat Oct 09, 2010 5:12 pm
Location: SMUGGLING COOOOOKIES ACROSS THE MEXICAN BORDER
Re: Winch bar specs
arb use 2.3mm wall pipe.
agree dont use checker plate, floor plate or some nuf nufs call it propellor plate, it will look nasty and CHEAP.
agree dont use checker plate, floor plate or some nuf nufs call it propellor plate, it will look nasty and CHEAP.
AUSTRALIA
WORTH LOOKING AT WORTH LOOKING AFTER
WORTH LOOKING AT WORTH LOOKING AFTER
Who is online
Users browsing this forum: No registered users and 1 guest