hi there. last week i overhauled my swivel hubs with all new seals and changed diff oil. now when i drive with hubs locked and in 4wd,there is horrible knocking/clicking noise or bang coming from left wheel. it only happens when i turn the wheel to one side and drive. if i go straight its ok. the knock/click is quite strong, you can feel it thorough the whole car. it even blocks the wheel for a sec like abs when i'm moving really slow. it only happens when in 4wd and hubs are locked. locked hubs and no 4wd and 2wd is ok. i checked the hub and cv today and couldn't find anything obviously wrong.
does anyone know what it could be, or what should i be looking for? its tb42 manual with manual locking hubs?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
cv or hub?
Re: cv or hub?
if its the cv. it'll be in peices...
Re: cv or hub?
Is it constant clicking or sort of a bit random?
If its not the CV, I will guess & say its the hub becoming disengaged from the, for lack of the proper term, 'drive collar'.
Have you put the cv snap rings back on in the right spot? Or the spacers behind the 'drive collar'?
If its not the CV, I will guess & say its the hub becoming disengaged from the, for lack of the proper term, 'drive collar'.
Have you put the cv snap rings back on in the right spot? Or the spacers behind the 'drive collar'?
2003 GU Patrol ST 4.2L Diesel Turbo Intercooled
1988 D21 Pathfinder 3.8L V6 & T700 - SOLD 11/12
1988 D21 Pathfinder 3.8L V6 & T700 - SOLD 11/12
Re: cv or hub?
Is neddle bearing still there and in good condition?
Who is online
Users browsing this forum: No registered users and 115 guests