Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3.5 rover

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 16
Joined: Tue Apr 13, 2010 1:29 pm
Location: SHEPPARTON

3.5 rover

Post by rrc350c »

I noticed the other day that one of my tappets was a bit noisey just wondering what this generally means and what can i do to fix it... thanks for any information regarding this topic its an efi 3.5 may i add
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Re: 3.5 rover

Post by GRIMACE »

Louder stereo / bigger exhaust :D
Top
Posts: 16
Joined: Tue Apr 13, 2010 1:29 pm
Location: SHEPPARTON

Re: 3.5 rover

Post by rrc350c »

haha yeah so ive been told but is it going to affect my engine if i keep driving it with the noisey tappet
Top
Posts: 82
Joined: Thu Feb 17, 2011 2:40 pm

Re: 3.5 rover

Post by 440 BB »

well valiants did it from the factory :lol: would probably do a bit of damage to the cam over time but thats probably due for replacement by now anyway
Top
Posts: 24
Joined: Sat Jan 13, 2007 10:11 pm
Location: cairns

Re: 3.5 rover

Post by shiftit »

If you,ve done an oil change recently,it could take a few k,s for the hydraulic lifter to fill up again, if not then it,s time to re invest in some new litters, not to harder job depending on your experience? It,s not going to kill your engine straight away though.
Top
Posts: 4
Joined: Thu Mar 27, 2008 2:18 pm
Location: ROCKHAMPTON

Re: 3.5 rover

Post by garc »

New cam and lifters, fit a 3.9 cam shaft to gain a little extra power and get the brain chipped by Graeme Coopers .
And then before you know it you'll be fitting some reco heads and the list will go on and on.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 41 guests