Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Head machining

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 6
Joined: Tue Nov 13, 2007 6:57 pm
Location: north brisbane

Head machining

Post by out&about »

Does anybody know a good place to get a tb42 head crack tested and repaired in north Brisbane ?
Top
Posts: 105
Joined: Sun Sep 13, 2009 8:39 pm
Location: Brisbane

Re: Head machining

Post by turbmav »

Northside cylinder head specialist in Geebung did a great job on my TB42 head. Price was the cheapest around as well.
Top
Posts: 6
Joined: Tue Nov 13, 2007 6:57 pm
Location: north brisbane

Re: Head machining

Post by out&about »

Thanks mate this is the 3rd time it's been done I just want it done properly.
Top
Posts: 105
Joined: Sun Sep 13, 2009 8:39 pm
Location: Brisbane

Re: Head machining

Post by turbmav »

You probly need to do a hardness test on the head as they get soft with overheating and check how staight it is.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests