Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4.8 gu exhaust mods

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 103
Joined: Fri Feb 27, 2009 12:48 pm
Location: ROCKHAMPTON

4.8 gu exhaust mods

Post by kbv8ute »

The missus shopping trolley is a 2008 gu 4.8 which we put a new exhaust. Finding that nissan have added two more o2 sensors 4 in total and a pair of cats in the manifold aswell as the standard cat under the car. Being told that is impossible blah blah blah to change the system did persist and found that using earlier model extractors which hold two 02 sensors and making a 2 into one 3" at the bottom into a euro 4 cat and fittted the last two 02 sensors after that, by unpicking wiring harness you can get enough wire! then goes through standard cat and then through mandrel bent system two straight through mufflers. Runs well and brings up no fault codes interested to hear if anyone else had a go at a newer series Gu and the outcome.
Ford Maverick ute, gen 3 boost,kewish auto, twin locked 17"kmc enduro bead lock rims, POW 84 winch wiring
Posts: 61
Joined: Tue May 19, 2009 4:12 pm
Location: lost

Re: 4.8 gu exhaust mods

Post by bigoll »

done basicly the same thing to mine (2006model) close to 2 years ago and have had no troubles so far, 2" 3/4" system, euro 4 cat and extractors. its better on fuel and hits the limiter a little faster.
Posts: 81
Joined: Tue Aug 04, 2009 6:16 pm
Location: rocky

Re: 4.8 gu exhaust mods

Post by POW84 »

Kbv8ute did u just run 400hp on the dyno on 37s?
Zilzie mav's GQ with 30 pound of swafftec turbo whizel..
Post Reply

Who is online

Users browsing this forum: No registered users and 54 guests