Wheel spacers on Rear Of leaf sprung GU

[Burdy]

Im looking at putting a set of wheel spacers on the rear of my GU to make the wheel track the same width as the front and to stop the tyres rubing on the chassis with narrower rear diff,would i have any issues running wheel spacers all the time and will the wheel bearing wear out any different or quicker with them on.Ive also measured the wheel track width from outside of tyres front and rear and came up with 1880 rear diff and 1990 front diff so there's 110mm approx in difference with the wheel track so could i run 25mm wheel spacers in the rear and would that solve my issue with the tyres rubing on the chassis

[vanbox]

Hey mate,

You would need 55mm spacers to be same as front, 50mm off the shelf is close enough.

I cant say for sure anything about your bearings, but the bearings in a coil truck are huge!....And yours are bigger.

[Burdy]

yea true i see that superior do a 1.5inch and a 2 inch

[big red]

a friend of my father has them on his ex telstra ute towing a big caravan around for the last few years ... no problems so far.