Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Wheel Bearing Temp
Wheel Bearing Temp
How hot should front wheel bearings be when u have driven 600kms, i put my hand on the free wheeling hub when i got home the other day from a trip and i could only keep my hand on it for about 4-5 seconds,the wheel bearings have only been recently replaced and have been nipped up once and no play in them at all
Re: Wheel Bearing Temp
Hey mate when you check is usually at a servo during a trip and the hub will be abit warmer due to the use of your brakes to pull up. obviously heat is generated from the discs. If you use a infared gun generally they are around 40-50 degress running. Obviously the hotter they are the grease looses viscosity and turns to liquid form like oil. Best bet would be have a look and check the bearing surface to see if any heat marks on the bearing face and while your in there repack them. Dont over tighten them this is also a factor that causes over heating.
Re: Wheel Bearing Temp
x2kbv8ute wrote: the hub will be abit warmer due to the use of your brakes to pull up..
pretty much impossible to tell by feel due to the heat soak.
Who is online
Users browsing this forum: No registered users and 1 guest