hello all, i've bee looking at engine bay pics to figure out how to bolt the filter tower. There are two parts, a flat bracket, and the tower bracket.......these are the only items i received and told i needed, but i cannot find a flush location around the steering box area to install.
Does anyone have the diagram? Or better does anyone have a close up pic?
Oh, btw, i am installing 1hzt into my 80
Much Thanks
Jonathan
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hzj80 fuel tower
Moderators: toaddog, Elmo, DUDELUX
Re: hzj80 fuel tower
I think it goes on the inner guard near the brake booster on drivers side or same area on passenger side. play with the captive nut holes there to get the correct pair. Is there for 100 and 75 series so probally same.
Re: hzj80 fuel tower
yea, just about to update, quick responses as always. So i couldn't sleep and went out to figure it out. I had to take out the guard to the steering shaft joint and another plate at the apex of the spring tower. Still need to find out where the vacuum goes.
Who is online
Users browsing this forum: No registered users and 40 guests