Anyone got any plans for a bash plate that goes from the bottom of the radiator back to the front diff?
For a 96 ifs sr5, want to make one out of either 3mm stainless or 6mm ally just can't see where I'd bolt it back to protect the diff aswell?
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Ifs bash plate
Moderators: toaddog, Elmo, DUDELUX
Re: Ifs bash plate
Do you have specs for that? Does it cover the diff??
Re: Ifs bash plate
That'd only replace the standard bash plate it wouldn't cover the diff. Best one I found was by a guy in America I have the link on my computer at home but it goes to the rear of the a arm. Bout $250US. I'll post it up later when I get home.
What do we want? TIME TRAVEL! When do we want it? THAT'S IRRELEVANT!
Re: Ifs bash plate
Here's the link:
http://www.budbuilt.com/new/ifs.html" onclick="window.open(this.href);return false;
http://www.budbuilt.com/new/ifs.html" onclick="window.open(this.href);return false;
What do we want? TIME TRAVEL! When do we want it? THAT'S IRRELEVANT!
Re: Ifs bash plate
i have a picture saved to my hard drive for the plans for a bash plate for an IFS surf/4runner. if you PM me your email address i can send it to you. if you measure it up with your car, you can see if it fits and make some adjustments if it doesnt.
matt
matt
89 Surf. 2''BL 2'' Susp Lift with 33'' Mickey Thompson MTZ's. good times
Who is online
Users browsing this forum: No registered users and 5 guests