Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Reverse Gear
Moderator: Tiny
Reverse Gear
Hey guys. I have problems getting into reverse gear sometimes. Any way to adjust it?
Re: Reverse Gear
Is there any way to tighten the linkages? 
Re: Reverse Gear
Just pop the clutch part way while holding pressure on the gear shift towards reverse. This will allow the teeth to mesh and it should pop in.
There is no 'gear linkage' per se in the feroza as it's straight through the floor into the box AFAIK.
There is no 'gear linkage' per se in the feroza as it's straight through the floor into the box AFAIK.
ferog wrote:I've had worse smelling fingers though.
Who is online
Users browsing this forum: No registered users and 0 guests