Just dropped a 2h with turbo kit from an Auto (no EDIC) after removing the previous 2h (car was and still is manual)
Ive adjusted fuel on a manual 2h (with EDIC, on the back of the pump) Ive done a 12HT (next to 6th injector on front of pump) but completely lost on the auto fuel pump - i cant see any lockwire to even give me a clue! Anyone got any idea?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Auto 2H Fuel pump Adjustment
Moderators: toaddog, Elmo, DUDELUX
Auto 2H Fuel pump Adjustment
[url=http://www.outerlimits4x4.com/ftopic129164.php[u]Supercharged SAS FJ Cruiser[/url]
Re: Auto 2H Fuel pump Adjustment
never mind found on mud.
For future reference.
"Small fuel screw at the top of the pump at the back under the intake manifold.
Undo the 10mm cap (may be wired shut) and remove it. Don't lose the copper washer.
Use the correct allen wrench to hold the adjustment screw in place while you use a 10mm box end to loosen the lock nut.
KEEP TRACK OF YOUR ADJUSTMENTS !!
Add about 1/2 turn fuel (tighten to add fuel on this engine, the 12HT is loosen and the screw is found on the other side of the hump at the top of the pump), and then hold the allen head adjustment screw in place while you tighten the lock nut, replace the washer and cap, then go for a test drive.
Keep your EGTs in check. "
http://forum.ih8mud.com/diesel-tech-24- ... tment.html" onclick="window.open(this.href);return false;
For future reference.
"Small fuel screw at the top of the pump at the back under the intake manifold.
Undo the 10mm cap (may be wired shut) and remove it. Don't lose the copper washer.
Use the correct allen wrench to hold the adjustment screw in place while you use a 10mm box end to loosen the lock nut.
KEEP TRACK OF YOUR ADJUSTMENTS !!
Add about 1/2 turn fuel (tighten to add fuel on this engine, the 12HT is loosen and the screw is found on the other side of the hump at the top of the pump), and then hold the allen head adjustment screw in place while you tighten the lock nut, replace the washer and cap, then go for a test drive.
Keep your EGTs in check. "
http://forum.ih8mud.com/diesel-tech-24- ... tment.html" onclick="window.open(this.href);return false;
[url=http://www.outerlimits4x4.com/ftopic129164.php[u]Supercharged SAS FJ Cruiser[/url]
Who is online
Users browsing this forum: No registered users and 5 guests