Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Probably a stupid question but anyway,
Does the rear axle bearing cap on a hilux use studs or bolts to fix it in position.
If they are studs, does anyone have the part number?
They are studs with a 'splined' surface where they sit in the housing (hammered or pressed in). One of them is special with a raised end that sticks out and is used for the pivot of the adjustment arm for the drum brakes in a lux.
If you look at the build thread in the link below you can see them clearly in a few of the pics - the guy was changing bearings and installing disc brakes in his build thread and took good photo's.