Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

which extractors for g13bb

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

which extractors for g13bb

Post by mrRocky »

Iam going to be shoving in a g13bb to my lwb next weekend and am just about to order the extractors for
it but i have been told the head is identical to the 1.6 mpfi and those are the extractors i should use is this correct will these
fit. http://www.ebay.com.au/itm/Suzuki-Vitar ... 53ec19441a" onclick="window.open(this.href);return false;

cheers mick
_____

[olllllo]
Top
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Re: which extractors for g13bb

Post by just cruizin' »

The vit extractors will hang down a lot lower as the 1.6 is a taller block. I have a similar set to this and the side by side pipes cause an issue where the go between the chassis and the bell housing.
;)
Top
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Re: which extractors for g13bb

Post by mrRocky »

thanks mate went a standard manifold for now
_____

[olllllo]
Top
Posts: 19
Joined: Mon Dec 24, 2007 8:46 pm
Location: Perth

Re: which extractors for g13bb

Post by masterA »

http://www.maxheaders.com.au/" onclick="window.open(this.href);return false;
http://www.ebay.com.au/sch/sis.html?_it ... ader%20New" onclick="window.open(this.href);return false;

;)
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 37 guests