G'day guys.
I'm in a bit of a pickle... I just installed an after market turbo on my cruiser and got all the piping, oil lines and what not hooked up. I haven't done the exhaust on it yet but I thought is start her up and see how she goes. I didn't do any thing stupid like revving the ringer out of it but I gave it a few short revs and some very fine oil like substance came out the back and onto my firewall.
It's like oil with thinners in it and I can't figure out where it would be coming from or if it is condensation mixed with soot.
Does anyone know if this is normal or not, even if it had an exhaust would it normally do this anyway?
Any help would be great... Thanks
Jamie
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
turbo help...
Moderators: toaddog, TWISTY, V8Patrol, Moderators
turbo help...
I mean, a turbo is great and all, but i'd rather be blown...
Re: turbo help...
Sounds like its just condensation or fuel from the engine after a cold start. Especially if it has been sitting around a few days while fitting the turbo.
I have black spots of shite like this all over my garage floor near the tailpipe from years of cold starts from diesels.
Could also be manufacturing / preserving oils etc in the turbo or manifold.
It will go away when warm.
I have black spots of shite like this all over my garage floor near the tailpipe from years of cold starts from diesels.
Could also be manufacturing / preserving oils etc in the turbo or manifold.
It will go away when warm.
Who is online
Users browsing this forum: No registered users and 1 guest