Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Modded my Rangie...Now The EVOLUTION of Bob! More pics up...

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by GRIMACE »

Micka wrote:
GRIMACE wrote:Just get this thing going already Micka so I can wheel it :armsup:
Can I borrow 5 grand then please?
A wristy a week for 3 years and your wish will be granted!

Seriously 5g to finish it? I thought it was pretty much done, I might be able to help out!
Top
Posts: 40
Joined: Fri Oct 23, 2009 3:58 am
Location: Gold coast

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by Grover69 »

GRIMACE wrote:
Micka wrote:
GRIMACE wrote:Just get this thing going already Micka so I can wheel it :armsup:
Can I borrow 5 grand then please?
A wristy a week for 3 years and your wish will be granted!

Seriously 5g to finish it? I thought it was pretty much done, I might be able to help out!
If you have some spare cash kicking around you should spend it on getting your POS together ,
I did notice you had your 37's up swap for 40's (Grimace you need something to put them on)
SO GET THAT THING GOING SO YOU CAN WHEEL YOUR OWN S**T!!!!! :bad-words:
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by Micka »

Bwhahahaha!!

40" tyres on Rover diffs...Grimace, surely you jest.

I agree with Grover. Get your junk wheeling. I'll have the cash soon enough.
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by RAY185 »

Micka wrote:I'll have the cash soon enough.
No you won't, that hunjy's gotta be due for another service soon. :finger:
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by Micka »

RAY185 wrote:
Micka wrote:I'll have the cash soon enough.
No you won't, that hunjy's gotta be due for another service soon. :finger:
Ha!

Fork that. Selling it. Repairing a Rover is cheaper than maintaining a Toyota.
Top
Posts: 1167
Joined: Tue Jun 16, 2009 10:42 am
Location: campbelltown

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by MogLux »

Micka wrote:
jbell wrote:Belly height is 600mm from ground to bash plate, there big detroit's !!!!! nice

Jeff
That's quite low considering your running gear. Nice work. I have been aiming at around 25" or 635mm for belly height, but if yours is 600 I should be able to get that with 40" tyres.

My belly is 650 on full compression on 42s... I run 4-6" up travel
Wow Jeff that is low for mogs...

Micka you get those axles sorted yet ...
Hell Raiser 4 seat social buggy..
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by Micka »

Some more trips to Outcast Offroad and some more gear from RuffStuffSpecialities have seen more progress. Greg built a mobile frame to hold Bob's chassis at ride height...

Image

Greg put the diffs under to check how it will look and start fabbing the cross members to take the lower link mounts...

Image


Image


Image
Top
Posts: 101
Joined: Mon Dec 04, 2006 10:49 pm
Location: Gold Coast

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by Petes »

very nice!
Top
Posts: 1846
Joined: Fri Oct 31, 2008 2:18 pm
Location: Brisbane

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by SCANAS »

Micka wrote:
RAY185 wrote:
Micka wrote:I'll have the cash soon enough.
No you won't, that hunjy's gotta be due for another service soon. :finger:
Ha!

Fork that. Selling it. Repairing a Rover is cheaper than maintaining a Toyota.
To buy another Disco? :shock:
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by Micka »

SCANAS wrote:
Micka wrote:
RAY185 wrote:
Micka wrote:I'll have the cash soon enough.
No you won't, that hunjy's gotta be due for another service soon. :finger:
Ha!

Fork that. Selling it. Repairing a Rover is cheaper than maintaining a Toyota.
To buy another Disco? :shock:
God NO!!!

The Sharmoota will be staying around for a while longer...even if it is an underpowered, fuel munching, bucket of puss.
Top
User avatar
TWISTY
Twisted by Design
Posts: 2607
Joined: Tue Jul 15, 2003 12:52 pm
Location: Sunshine Coast QLD

Contact:
Contact TWISTY

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by TWISTY »

Micka wrote:Greg built a mobile frame to hold Bob's chassis at ride height...
Ride height? or full droop? seems high for ride height.
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by Micka »

TWISTY wrote:
Micka wrote:Greg built a mobile frame to hold Bob's chassis at ride height...
Ride height? or full droop? seems high for ride height.
Ride height, baby.

The boat sides and no quarter panels make it look taller than it really is. Belly clearance is 635mm at the moment, and if possible I'll try to get another 25-50mm down, but having huge diffs and portals means it's gonna be a big fawker.

I'm going there tomorrow to do some more work on it and we'll hopefully have the lower link cross member done and the diffs all but under it.
Top
Posts: 209
Joined: Thu Nov 05, 2009 10:11 am
Location: learning new stuff

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by discothrasher »

just got back from OUTCAST OFFROAD your rig is looking the goods now ,be good to see it again in 2 weeks when i get back :armsup: :popcorn:
2005 GUIV 4.2 STS
TUFF TRUCK 2015 PROJECT TEAM OUTCAST
THANKS : OUTCAST OFFROAD
NERANG DIFFERENTIALS
Top
Posts: 3685
Joined: Sat Sep 27, 2003 8:38 am
Location: Sydney

Contact:
Contact Roctoy

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by Roctoy »

Micka wrote:Image
the diffs are too narrow and your tire is mounted upside down and back to front. :finger: it's gonna tip over, you might as well have built a Daihatsu terios with a 3" body lift.
Outers & Arms up stickers coming soon you hungry bitches!

http://www.myultimate4wd.com
GRIMACE wrote:How I miss the days of care free wheelin with the crews!
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by Micka »

Fark!...a Terios would have been awesome :bad-words:

Got the cross member made up and the lower link brackets at the chassis and diff ends are all done. After some stuffing around we managed to get the belly clearance to 550mm and wheelbase to 110". Should be able to get the shocks mounted under the bonnet too using 18" travel airs with 5" of up travel.

Probably going to go against my better judgement and run it on petrol now. I really wanted propane, but the ease of setting everything up now, and refuelling whenever/wherever I want later on is going to sway me. Might change it down the track a bit when I swap out the LT for an Atlas.
Top
Posts: 395
Joined: Thu Nov 06, 2003 4:36 pm
Location: cowtown W.A.

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by jbell »

Thats lots of up travel, the sump stopped me at 3" before the bump stops start working ! 5" diff would be in the sump !!! my wheel base is 115"..

getting it done !!!

Jeff
rover money pit on mogs !!!
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by Micka »

RovingTracks custom MogSals 40 spline axles for your viewing pleasure!!!!!




You better put some tissues over your keypad...




The 4 axles in the front. 1.8" diameter at the Mog end and 1.71" at the diff end...
Image



Beside a Rover 24 spline...
Image



Beside a Toyota 30 spline...
Image


Boo ya!!!!!

Massive :armsup: to Keith Kreutzer from RovingTracks for making these bad boys for me. Can't wait to have them land on my doorstep in the next 10 days. I'll need to arrange a low loader to get them to Outcast Offroad for fitting :D

Another step closer, Nottie...wish you were here to see them, old mate.


Mick
Top
Posts: 209
Joined: Thu Nov 05, 2009 10:11 am
Location: learning new stuff

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by discothrasher »

:armsup: :armsup: massive, let the shit start going on again at the outcast shed :drinking:
2005 GUIV 4.2 STS
TUFF TRUCK 2015 PROJECT TEAM OUTCAST
THANKS : OUTCAST OFFROAD
NERANG DIFFERENTIALS
Top
Posts: 1315
Joined: Wed Aug 17, 2005 6:24 pm
Location: Spring Mountain, Greenbank.

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by brooksy »

Gay looking tooth picks !!! :finger:



brooksy
C44F-Custom 4x4 Fabrications
0400 443 802
brooksy72@live.com.au
Top
Posts: 1167
Joined: Tue Jun 16, 2009 10:42 am
Location: campbelltown

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by MogLux »

:) :) now lets hope the measurements I gave you are correct hey... :D

Good to see you got the belly down abit... But you could still lower it even more with 5in up travel..

I'm going for 600 belly with my front shoxs layer back 350mm in the front on my new buggy on mogs... Start it August.. 4 seater on mogs, 5lt auto :armsup:
Hell Raiser 4 seat social buggy..
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Top
Posts: 851
Joined: Wed Oct 20, 2004 9:41 am
Location: Caboolture

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by Troll00 »

Sorry I could get the tissues quick enough!
Nottie would be impressed, but would be telling you it not quite right
The Original Massojet
Check you local 4x4/Ray's Outdoors store for stock NOW
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by RAY185 »

Nice shafts! It's not often you get to see such a fine selection out on display all at once. The last time was that night out at Moreton if I recall correctly....
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by GRIMACE »

RAY185 wrote:Nice shafts! It's not often you get to see such a fine selection out on display all at once. The last time was that night out at Moreton if I recall correctly....
Time for another one me thinks :armsup: This time lets try to actually do some fishing instead of just drinking and fondling each others balls whilst being strangulated!
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by Micka »

Got the rear 4 link in and all welded up...

Image


Image


Image
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by Micka »

Links are 2" diameter with 12mm wall thickness. Heims are 1.25" chromo from Ruff Stuff Specialities.
Top
Posts: 1097
Joined: Wed Feb 16, 2005 5:07 pm
Location: brisvagas

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by def90 »

pfft they will fold :roll:

hope u carry plenty of spares :lol:
1986 - Stage 1 V8 serIII style side ute - gone
1997 - 300 TDI 130 single cab ute - gone
1986 - 90 defender soft top, bars, buttons and tyres
2000 - TD5 disco 'the boss's rig'
Top
Posts: 395
Joined: Thu Nov 06, 2003 4:36 pm
Location: cowtown W.A.

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by jbell »

same gear as my lower links !! nice


Jeff
rover money pit on mogs !!!
Top
Posts: 851
Joined: Wed Oct 20, 2004 9:41 am
Location: Caboolture

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by Troll00 »

Come on Mick progress on this, it's been over 2 years since Nottie stopped nagging you.
The Original Massojet
Check you local 4x4/Ray's Outdoors store for stock NOW
Top
Posts: 2526
Joined: Wed Sep 01, 2004 8:21 am
Location: Outcast Offroad

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by Micka »

Some updates:

The fuel cell and rear air shocks have been set in place. These are 2.5" body RaceRunners with 18" travel set for 5" up travel.


Image


I scored a rare day off during the week last week so I headed down to Outcast Offroad and set the front shocks up...

Image

Again these are 18" RaceRunners with 5" up travel...

Image

Image

Tops of the shock hoops J-U-S-T poke thru the bonnet. I was hoping to keep it all below bonnet height but I would have had to lay them back too far for my liking.


Image


I sold my 40" Treps to buy these bad boys. 43" Sticky TSL SX. Get them in a week or so. Can't wait to mount them...and put them on rims.


Image
Top
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Re: Modded my Rangie...Now The EVOLUTION of Bob! More pics u

Post by GRIMACE »

Micka wrote: bla bla bla bla bla bla bla

Image

Spoooge!
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest