hi guys i got a maverick with a TB42 carby bog stock on gas and i was out 4x4ing to day out the back of glass house and found myself in a position where i need just a littel more power to get through.
what are some basic thing is can do to get some more ponies out of the old girl.
1: extractors and 2 3/4" exhaust stright through
2: eletric up grade for the dizzy. which one do you guys recomend
is there any thing i can do to the inlet side biger carby different manifold.
any thing eals you guys can think of thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
TB42 needs some more ponies
Re: TB42 needs some more ponies
hey mate
i got pertronix ignition form patrol apart realy good stuff mate made alot of differance
i got pertronix ignition form patrol apart realy good stuff mate made alot of differance
Re: TB42 needs some more ponies
Hey i have a few years ago done a mates one we fitted - New camsaft grind to suit LPG , refaced lifters (made it super quite ) but a big job head off etc
- Extractors , 2 & 1/2 inch exhaust - dont go straight through not enough back pressure
- Hi energy igntion form performance ignition in nunawading vic
- Impco 300A mixer and L model LPG converter
It went real well and heaps better on gas consumption too, hope this helps. We did all this because it blew a head gasket .
- Extractors , 2 & 1/2 inch exhaust - dont go straight through not enough back pressure
- Hi energy igntion form performance ignition in nunawading vic
- Impco 300A mixer and L model LPG converter
It went real well and heaps better on gas consumption too, hope this helps. We did all this because it blew a head gasket .
Re: TB42 needs some more ponies
Ok thanks guys thinking of going turbo any segestions Wat size turbo would be good For the tb42. Wat reves would be good for the car to start spooling up, between 1700 and 2000 ?
Thanks
Thanks
Re: TB42 needs some more ponies
I've been looking at fitting a holley 350 carb but mounting it sideways for the hills ect. ect.
What do you guys think about that????
What do you guys think about that????
Who is online
Users browsing this forum: No registered users and 1 guest