Hi, this is just a bit of advise for all that are thinking about engine replacements.
The maximum size petrol motor that you can fit into a full size 4wd is 5.8lt/351ci.
Where as the 6.2 & 6.5 Chev diesel can be fitted and plated under the LA1 Code.
Anything over 5.8 excluding the 6.2 or 6.5 (Chev) diesel you must first seek approval from Vehicle Standards/Qld Transport to fit motor (Form 1854).
If approved they will then give you an approval letter which you then give to your Engineer or Approved Person for plating. This is a one of Approval and it must be sought again if you are going to do another one.
Cheers
David
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
6lt motor transplant Nissan/Toyota - Queensland
Moderators: toaddog, TWISTY, V8Patrol, Moderators
6lt motor transplant Nissan/Toyota - Queensland
David Metcalfe, runs Xtreme 4X4 Sport which is the home of ARB Xtreme Winch Challenge Series, Xtreme International & 4WD Angel Adventure supporting Angel Flight Australia
Who is online
Users browsing this forum: No registered users and 1 guest