Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1HDFTE gearbox to 80 1HZ?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 211
Joined: Thu Oct 15, 2009 8:03 pm
Location: PORT STEPHENS

1HDFTE gearbox to 80 1HZ?

Post by rowenb »

Wondering how much trouble you'd have fitting a manual box from 100 series 1hdfte to 80 series 1hz? Basically same gearbox but use different size clutch right?
Top
Posts: 168
Joined: Sun Nov 30, 2008 4:44 pm
Location: Sydney

Re: 1HDFTE gearbox to 80 1HZ?

Post by popeyehj60 »

yep. pretty much. just gotta match flywheel size and input shaft splines to the clutch kit.
Top
Posts: 211
Joined: Thu Oct 15, 2009 8:03 pm
Location: PORT STEPHENS

Re: 1HDFTE gearbox to 80 1HZ?

Post by rowenb »

So I can get away with using the clutch and fly wheel off the z? Only asking this as I can pick up a good cheap box out of a 100 series.
Top
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: 1HDFTE gearbox to 80 1HZ?

Post by 80's_delirious »

No, the input shaft is different, I'm in the process of collecting parts to do the same conversion. you either need to use 1HDseries fly wheel and clutch plates, or have someone like exedy clutch make a hybrid clutch plate for you.
Transfer case inputs are different also.
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 69 guests