Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
placemant of pyro probe?
placemant of pyro probe?
Hey guys just wondering where is the best position for placing the pyro probe,(as in before the turbo or after the turbo). many thanks in advance.
Re: placemant of pyro probe?
most people go post turbo in the dump pipe for ease.....
Re: placemant of pyro probe?
X2
The closer to the pistons, the more accurate it will be.
On that note if I was to place the probe in cylinder 1 or 6 exhaust outlet (as they will be the hottest on a std setup) what max temp would I be looking for?
The closer to the pistons, the more accurate it will be.
On that note if I was to place the probe in cylinder 1 or 6 exhaust outlet (as they will be the hottest on a std setup) what max temp would I be looking for?
GU td42 ute with go fast bits and go futher bits
Re: placemant of pyro probe?
Pre turbo, IMO post turbo is a waste of time and money and gives little to no value.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Re: placemant of pyro probe?
Mabee if you have a 4.2.hulsty wrote:Pre turbo, IMO post turbo is a waste of time and money and gives little to no value.
It works well after the turbo on a ZD30. Beats sticking your head in a hole in the ground.
GU Patrol with go better bits added
Re: placemant of pyro probe?
50mm past the turbo flange works fine.
GU Patrol with go better bits added
Re: placemant of pyro probe?
thanks for the reply everyone.sounds like pre turbo is the go.There is a grub screw there allready.just got to get it out.seems very tight.
Re: placemant of pyro probe?
Soak it in moretein fly spray...Trust me a ship builder showed me.
Re: placemant of pyro probe?
cheers turbo ls2 i will give it a go.
Who is online
Users browsing this forum: No registered users and 65 guests